what size/ rims should i get?
08-08-2009, 07:55 AM
#1
TECH Resident
Thread Starter
iTrader: (10)
Join Date: May 2005
Location: Long Island, NY
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
what size/ rims should i get? - right now i have black Z06 motorsports 17x9.5 in all corners
- my rear is out of a 3rd gen, meaning its narrowed about 4 inches
- my rear rims sit on 1.5" spacers and did rub (hammer+ inner fender= Now no rub)
- i want to go to a 10 inch wide rim without the spacers- WHAT SIZE BACKSPACING AND OFFSET DO I NEED
- i also want a 15" rim in the rear and 16" or 17" in the front (rear for dragracing, front for DD)
- i dont want a skinny in the front since i still have the dual piston calipers, in the rear i have lt1 calipers
- i want to maintain the look of the black rims, WHAT RIM COULD I GET IN BLACK FOR THE FRONT AND REAR?
thanks for everyones help! the main questions are in caps
- my rear is out of a 3rd gen, meaning its narrowed about 4 inches
- my rear rims sit on 1.5" spacers and did rub (hammer+ inner fender= Now no rub)
- i want to go to a 10 inch wide rim without the spacers- WHAT SIZE BACKSPACING AND OFFSET DO I NEED
- i also want a 15" rim in the rear and 16" or 17" in the front (rear for dragracing, front for DD)
- i dont want a skinny in the front since i still have the dual piston calipers, in the rear i have lt1 calipers
- i want to maintain the look of the black rims, WHAT RIM COULD I GET IN BLACK FOR THE FRONT AND REAR?
thanks for everyones help! the main questions are in caps
Last edited by greatskiiiier; 08-08-2009 at 08:02 AM.
