Casperws6

about this wheel http://www.lmperformance.com/images/...g/z061795b.jpg on a white ws6? any feedback and advice welcome. If u guys have any suggestions where i should get wheels at let me know. thanks

Casperws6

anyone?

MadIceV8

iTrader: (12)

Its a black Z06 wheel with bullets.... I think it will look really good.

Brak Attack

iTrader: (10)

I think it would look great. A 17x9 in the front and 17x10.5 or 11 in the rear with a little more lip than the front would be ****. I will see if I can post a picture of my buddy's Camaro with similar rims.

02blackws679ta

bullets? you mean rivets? :dunno:
i like z0hsex wheels pretty well, but im just not a fan of the rivets on these type of z06's, also not a fan of black wheels, but they could look pretty pimp on your white car

Brak Attack

iTrader: (10)

This is actually his wife's car.

Casperws6

thanks everyone for ur feedback. would it be a waste to just get the 35th anniversery wheels? i just want to see what people have done to their cars or if people have done this before. thanks

Casperws6

also, what offset do i go with...that replica was offered in a 38mm and 54mm which is the right one?

Brak Attack

iTrader: (10)

I will try to find out.

5POINT7

Go with 38mm. You have a WS6, with wider fenders than Camaro's. The 38's will stick out more than the 54's, filling the wheel well nicely.

My two cents, stay away from Z06 wheels. I don't like them on Formula's and T/A's because our cars have so much more shape than Camaro's. It ruins the lines of our shapely cars IMO.

Casperws6

well i do wanna slap some black rims on my car... which rims would u recommend than?

Taco

iTrader: (1)

My vote would have to go to the CETA wheels if you want black, they are the same as the factory WS-6, just painted (powdercoated?) black.

They look awesome.

Stangkilr

iTrader: (47)

Gosh I want those wheels!!

ActionJack

LOL

You have those wheels but in chrome.

Casperws6

where do u buy those at or where can i at least see them?

bluestreak98

iTrader: (21)

i think the rivets are fugly

Taco

iTrader: (1)

I'm sure you could do a search on the board and find plenty of pics....

Nevermind, I'll do tha looking for ya', click Here

Me Like!
Taco

5POINT7

Black ZR-1's (38mm in the front, 36.5mm in the back). On ebay, buy it now mad cheap.

Painted gray Torque Thrust II's

Painted gray Boyd Coddington Smoothie II's.

02 WS6 TA

iTrader: (7)

Thanks Brak Attack for the link. That's my wife's Z28, and the wheels are 18X9.5 Front and 18X10.5 Rear Z06 Replicas. The car is lowered with a Pro kit, and things work well in the rear, although the rear fenders are rolled.

02WS6Bird

iTrader: (2)

the blakc and polished lip is what i told my buddy with his white camaro to do...HE DIDNT LISTEN!!! he went chrome.....not bad but its already been done out here