10s just barely.
Thread Starter
10 Second Club
Joined: Aug 2006
Posts: 287
Likes: 0
From: Dayton Ohio
10s just barely. 1.54---------------60ft
4.4691-------------330ft
6.9491-------------1/8 et
98.42--------------1/8 mph
10.9481------------1/4 et
121.59-------------1/4 mph
This was on 150 shot. then they told me i need a cage.
mods in sig.
4.4691-------------330ft
6.9491-------------1/8 et
98.42--------------1/8 mph
10.9481------------1/4 et
121.59-------------1/4 mph
This was on 150 shot. then they told me i need a cage.
mods in sig.
Thread Starter
10 Second Club
Joined: Aug 2006
Posts: 287
Likes: 0
From: Dayton Ohio
Its a 8 inch circle d 4800 stall.
The car ran 12.2 on motor with timing pulled for n20. still have a cam on the shelf to go in soon.
By the end of the year i want a 10.5 on n20 with the cam and 11.5 on motor.
The car ran 12.2 on motor with timing pulled for n20. still have a cam on the shelf to go in soon.
By the end of the year i want a 10.5 on n20 with the cam and 11.5 on motor.
Thread Starter
10 Second Club
Joined: Aug 2006
Posts: 287
Likes: 0
From: Dayton Ohio
Its 4800 on spray.
The cam is a blower cam not ideal for n20 but i dont care.
236-230 602-590
Evil8 sold it to me out of engine he had bought for cheaper then new with heads and springs. should run good on motor and ok on spray i red if you go more then 150 cams start to play a bigger roll.
its only going to stay in for awhile though.
The cam is a blower cam not ideal for n20 but i dont care.
236-230 602-590
Evil8 sold it to me out of engine he had bought for cheaper then new with heads and springs. should run good on motor and ok on spray i red if you go more then 150 cams start to play a bigger roll.
its only going to stay in for awhile though.
