zzracer

iTrader: (33)

Had some good weather today. Da was - 050 around 12:00 ,60 degrees and about 70% humidity.

Tuskyz28

Thats rolling!! Whats all done to the 408ci ?

zzracer

iTrader: (33)

Yours? I got a sbe LS2 if anyone believes it or not that's on them.

onebadbowtie86

iTrader: (13)

Awesome! flying for a sbe ls2!

Tuskyz28

The baddest SBE LS2 on board

JonCR96Z

iTrader: (33)

zzracer

iTrader: (33)

The pass in the video was with one of my buddies driving so I could get a descent video of the car leaving. No one else could seem to get one up that close. He ran 10.29@129mph that pass if you can't see it in the video. That was about 3:30 pm last pass made. I didn't get that time slip from him.

madmike9396

iTrader: (29)

I dont think anyone realizes the countless test and tune sessions zzracer has been to over the past few yrs to get his car to this point. Tweaking suspension etc
He just didn't build a motor and throw it into this car and make passes like that. Alot of time and effort has went into that car to make that 10.20 1/4 6.4 1/8 pass.
if someone would like to bet a couple Grand. I'm sure he would pull the head and show you.

I expect to see it even faster next time out.

Congratulations on the times I know you are happy 😁

zzracer

iTrader: (33)

I have tweaked the car for the last 4 years. Engine hasn't been touched other than changing the oil and spark plugs. All the work has been done to make the car work at the track and it still needs work. I want it to leave without pulling the wheels . People don't understand more power is not always what makes you faster. My car works good but I'm not satisfied with it ,never done. Having a good tuner that has spent time tweaking the tune helps a lot too. Thanks to Joncr96z for that .
Thanks Mike

Z28SteveA4

iTrader: (16)

Damn zzracer!! You are really getting that car dialed in!! Awesome passes! What’s the rest of the ls2 combo and weight of the car

zzracer

iTrader: (33)

Ls2 sbe, ported /shaved 799 heads, 236/242 cam, fast 102, 1 7/8 texas speed long tubes , custom y pipe with flowmaster 3" to 4 merge with a 4" bullet muffler. Performabuilt 60e, yank or 4000 converter. 8.8 hybrid rearend with 4.11 gears on 28" et streets, vikings on all 4 corners, bmr extreme arb. I ported the heads and done all the work and Joncr96z does the tuning. 3400 plus Race weight yesterday scales were closed so don't know exactly. Thanks

jhshnh

I love to see another n/a car dial in your car and roll. The times are all impressive but that 60’!?! You can’t be denied, sir. Congratulations. Keep tweaking.

Just wondering, what rpm are you turning at the finish line? Reason I ask is my build is similar.

zzracer

iTrader: (33)

I didn't log any runs yesterday and wasn't watching the tach. I can probably look at my dyno graph and get a close number might be a little different on the track.
Thanks

N2RACINGLS1's

iTrader: (2)

Congrats on the new best! Car continues to improve at the end of the day that is all any of us can hope for. I want this COVID to go away so I can get back to the track and see what my little 400 hp, 346 LS1 can produce with the changes I been working on.

One thing you said which is 100 percent true, it is all in the details! I have been enjoying my car for years and it has been so much fun seeing it come from traveling down the 1/4 mile in the mid 13 second range to running 10's all day long any time it is at the track.

Keep up the great work.

N2

zzracer

iTrader: (33)

Looking at the logs we done on the dyno it's turning 6960 at 129 mph.

jhshnh

Ok. That’s really good considering how fast it is.

zzracer

iTrader: (33)

Thanks N2, best advice I can give to anyone is don't be satisfied and settle . Look for ways to improve your car!

Z28SteveA4

iTrader: (16)

I think you have proven that very well!! Very impressed with that ls2 combo!! You are going faster then most 402-416 strokers at your weight

Tuskyz28

Yea he is. I found out yesterday his name was John Force.

zzracer

iTrader: (33)

Your crazy Tusky.🤣