is this enough for 10's?
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 55
Likes: 0
is this enough for 10's? forged 347 with 100 shot of nitrous, magic stick 4, PRC stage II cylinder heads, LS6 intake, L/T's, and other bolt ons. And about how much power you think i would make to the wheels? is basically that TSP 347 long block.
It should run 10's but you are more than likely going to need a 9" or 12-bolt rear end, some suspension, and some sticky tires.
It really depends on if the car is a 6-speed or an auto?
It really depends on if the car is a 6-speed or an auto?
Power wise it shouldnt be a problem, but again as everyone else said it is gonna come down to if you can hook up or not at the track and if you do will your stock tranny/rear hold the power or grenade.
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 55
Likes: 0
Originally Posted by TeEnAgE pHeNoM
It should run 10's but you are more than likely going to need a 9" or 12-bolt rear end, some suspension, and some sticky tires.
It really depends on if the car is a 6-speed or an auto?
It really depends on if the car is a 6-speed or an auto?
Originally Posted by white00z
i have an auto, and yeah i would eventually get a 12 bolt and some slicks, tranny wise for now just a converter, how long you think that tranny would last?
It might last one pass or it might last 200 passes. You never know with those trannies. Just don't spray it through the shifts and it should hold up a little longer. The rear end also is fine for an auto car there are plenty of people running in the 10's with a stock 10-bolt.
