Need .054" head gaskets for 408.
Thread Starter
TECH Apprentice
Joined: Oct 2005
Posts: 320
Likes: 0
From: Norwalk, CT
Need .054" head gaskets for 408. Hey everyone, I am looking for a head gasket that is about .054" thick. Thunder lists cometics on their web site with 4.190 bore, .054 but I think its a misprint. They are not listed on cometics web site. I believe someone found one in a Fel-pro mls but I cant seem to find it. Thanks for the help.
Won't factory MLS head gaskets work? The LS1 gasket is that thick. Check to see if the LS3 or LS7 has the bore diameter you need. The thickness should be fine. I wouldn't waste money on the Cometics if I didn't have to. GM head gaskets have worked perfectly for me.
Oh, and I'd stay away from the Felpros! I've read some threads in which they failed. Why risk it!
Oh, and I'd stay away from the Felpros! I've read some threads in which they failed. Why risk it!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Apprentice
Joined: Oct 2005
Posts: 320
Likes: 0
From: Norwalk, CT
Does anyone know the specs for the L92 gasket? I believe it has a bigger bore. Are all GM MLS gaskets the same thickness?
I was searching this and came across a post where someone said AFR heads require a gasket bore of 4.190. I have never heard of this, but I was curious if this applies to my TFS heads.
Someone should make a sticky of all the factory head gasket specs...
I was searching this and came across a post where someone said AFR heads require a gasket bore of 4.190. I have never heard of this, but I was curious if this applies to my TFS heads.
Someone should make a sticky of all the factory head gasket specs...
Does anyone know the specs for the L92 gasket? I believe it has a bigger bore. Are all GM MLS gaskets the same thickness?
I was searching this and came across a post where someone said AFR heads require a gasket bore of 4.190. I have never heard of this, but I was curious if this applies to my TFS heads.
Someone should make a sticky of all the factory head gasket specs...
I was searching this and came across a post where someone said AFR heads require a gasket bore of 4.190. I have never heard of this, but I was curious if this applies to my TFS heads.
Someone should make a sticky of all the factory head gasket specs...
Does anyone know the specs for the L92 gasket? I believe it has a bigger bore. Are all GM MLS gaskets the same thickness?
I was searching this and came across a post where someone said AFR heads require a gasket bore of 4.190. I have never heard of this, but I was curious if this applies to my TFS heads.
Someone should make a sticky of all the factory head gasket specs...
I was searching this and came across a post where someone said AFR heads require a gasket bore of 4.190. I have never heard of this, but I was curious if this applies to my TFS heads.
Someone should make a sticky of all the factory head gasket specs...
i was going to run the GM MLS gasket. i need to get on the phone with trick flow.
https://ls1tech.com/forums/generatio...mpilation.html
https://ls1tech.com/forums/generatio...mpilation.html
Measure the width of the combustion chamber on the head and the bore diameter of the block. Then, pick a gasket with a bore diameter larger than both measurements and the thickness your looking for.
