Ran Low 11's
Ran Low 11's Mods:
PP LS6 STG 2 heads, Fast 90/90, TR224/227 570ish 114, EWP, Stainless works 1 3/4 headers, magnaflow catback, TR6 plugs, Yank SS3600, Mickey Thompson Drag radials 275/40 /17 and 100 shot N20 dry, 100 octane, 10bolt, 3:73's, full weight, 80,000 miles on the bottom end
First pass N/A
60' 1.671
330' 4.862
1/8 7.531
MPH 91.79
1000' 9.838
1/4 11.775
MPH 116.82
2nd pass 100 shot Dry Spraying in 2nd gear
60' 1.679
330' 4.757
1/8 7.285
MPH 97.75
1000' 9.444
1/4 11.263
MPH 123.94
Next day OCT 19 Made one N/A pass 11.746 @ 116.60. Then a N20 run Spraying just out of the Hole. But had 2 issues during the run.
1st was hitting the limiter going into 2nd and getting off the throttle and back in it. Then at the 1000' mark the Air fitting on the passenger header broke off so I coasted thur the traps thinking the motor went.
Could have been a 10 but oh well 
60' 1.632
330' 4.644
1/8 7.215
MPH 96.24
1000' 9.401
1/4 11.255
MPH 118.35
PP LS6 STG 2 heads, Fast 90/90, TR224/227 570ish 114, EWP, Stainless works 1 3/4 headers, magnaflow catback, TR6 plugs, Yank SS3600, Mickey Thompson Drag radials 275/40 /17 and 100 shot N20 dry, 100 octane, 10bolt, 3:73's, full weight, 80,000 miles on the bottom end
First pass N/A
60' 1.671
330' 4.862
1/8 7.531
MPH 91.79
1000' 9.838
1/4 11.775
MPH 116.82
2nd pass 100 shot Dry Spraying in 2nd gear
60' 1.679
330' 4.757
1/8 7.285
MPH 97.75
1000' 9.444
1/4 11.263
MPH 123.94
Next day OCT 19 Made one N/A pass 11.746 @ 116.60. Then a N20 run Spraying just out of the Hole. But had 2 issues during the run.
1st was hitting the limiter going into 2nd and getting off the throttle and back in it. Then at the 1000' mark the Air fitting on the passenger header broke off so I coasted thur the traps thinking the motor went.
Could have been a 10 but oh well 60' 1.632
330' 4.644
1/8 7.215
MPH 96.24
1000' 9.401
1/4 11.255
MPH 118.35
Last edited by wws699; Oct 28, 2008 at 06:56 PM.
The suspension could definatley be better reguardless of track prep.
What kind of 60' and 1/4 times are you getting with your setup?
