dudeman

iTrader: (43)

i just got back from the track with the fastest time of 11.84.
setup-
02 z28 6 speed
stock motor with longtubes
tnt f2 with 125 shot
harris speed works interface and nitrous controller
stock rear and 3.42 gears
m/t drag radials

60ft. 2.00
1/8 7.77 @95.36
1/4 11.84@121

next best run was 11.87@123 with a 2.1 60ft.

i will try to get a pic of the slip on here soon!

by the way nitrous is BADASS!!!

jetlag

iTrader: (32)

I'd say easy 10s if you got the 60ft down a lot.

dudeman

iTrader: (43)

what tires do you use? whats your 60ft?

Omega Doom

iTrader: (2)

yea you get that 60ft to around 1.6's even 1.7's and you will be damn close to 10's! what other bolt ons do you have? use some MT DR's!

dudeman

iTrader: (43)

lid, k&n filter, lt's, o/r y-pipe, magnaflow catback. i had some m/t drag radials on, it was garbage out of the hole or spinning. i just couldnt get it down. i think slicks are the answer to the 60ft!!!

bottle pressure was about 800 psi also.

jetlag

iTrader: (32)

BFG drag radials
1.52

dudeman

iTrader: (43)

3600lbs with me in it by the way.

01Z28Camaro

I have no experience launching a 6 speed f body at the track. However with a decent burn out, Try launching on motor, spray around the top of second gear.

You should manage a 1.7 with practice, then try spraying sooner.

dudeman

iTrader: (43)

i was having problems with my burnout. at first both tires would spin, once the tires started to get hot then the pass side would just go up in smoke. junky 10 bolt.