11s tonight
Thread Starter
Joined: Dec 2008
Posts: 983
Likes: 361
From: Washington TWP, NJ
11s tonight Tonight at Atco.
Nice night, not too hot, but still August hot.
several good 11 sec passes.
Best of was 11.75@117
new stuff I did was Headers, UD pulley, and 4.10 gears.
Tuned by ECS
I went from 12.2 (consistant) to 4 11.7xx runs tonight with the header/pulley/4.10 gears/tune.
I'm very happy with the way my car is running.
Nice night, not too hot, but still August hot.
several good 11 sec passes.
Best of was 11.75@117
new stuff I did was Headers, UD pulley, and 4.10 gears.
Tuned by ECS
I went from 12.2 (consistant) to 4 11.7xx runs tonight with the header/pulley/4.10 gears/tune.
I'm very happy with the way my car is running.
WOW...
good time without a cam swap. 60 ft time is amazing for M6
Running slicks? Or a nice set of Drag radials?
My FRC M6 will not cut better than a 2.1 60ft on run flats...
good time without a cam swap. 60 ft time is amazing for M6
Running slicks? Or a nice set of Drag radials?
My FRC M6 will not cut better than a 2.1 60ft on run flats...
Thread Starter
Joined: Dec 2008
Posts: 983
Likes: 361
From: Washington TWP, NJ
Thanks
Hoosier drag radials are great for hooking up.
275/40/17 on stock 17x8.5 thinspokes.
Launch at 5000rpm. 4.10 gears has a lot to do with it too. My previous best (with 3.42 gears) 60' was 1.72
Here's a video
http://www.youtube.com/watch?v=tehaVPhhEVU
Hoosier drag radials are great for hooking up.
275/40/17 on stock 17x8.5 thinspokes.
Launch at 5000rpm. 4.10 gears has a lot to do with it too. My previous best (with 3.42 gears) 60' was 1.72
Here's a video
http://www.youtube.com/watch?v=tehaVPhhEVU
great times, i recently did the swap to 4.10's what is your rev limiter set at? i am coasting through traps in the 1/8 trying to shift into 4th and have lost some trap speed but my rev limiter is still at 6000 so i am shifting at 58-5900
Trending Topics
My FRC makes 375rwhp small cam and headers
I guess if I can get traction I should run high 11s
never ran a 1/4 yet. I have done 8.3 in the 1/8th with it...
2.2 60ft
run flats
My C3 LS1 has gone 12.00@115 with 1.78 60ft.
New times coming soon with my 418 LS3
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
definitely, my FRC makes 332 rwhp and 345 rwtq best 1/8 with 3.90's with a 1.79 60' was 7.89 @90 mph. I added tex clutch 4.10's will be doing a ls6 intake soon and bumping the rev limiter and i am hoping to touch 11's
Yo congrats, your vette is flying! I am down at atco alot but haven't seen your car run yet. Next time I'm down there I'll look for ya in the staging lanes. Nice cool fall air coming soon, your ets will drop some more!
gotta love atco only 23' above sea level you luck bastards 
I jsut got me some M/T DRs so hopefully i will get my 11 sec time slip...
Previous best on street tires was 12.3 @ 115 with a 1.9 60'
I jsut got me some M/T DRs so hopefully i will get my 11 sec time slip...
Previous best on street tires was 12.3 @ 115 with a 1.9 60'
Also what wheels and tires are you using for that 1.79 60ft?
Thread Starter
Joined: Dec 2008
Posts: 983
Likes: 361
From: Washington TWP, NJ
