Bolt-On WS6 in the 11's!
Bolt-On WS6 in the 11's! Happy to say that I finally broke into the 11's! It feels good. I know it's not fast, but for my mods I am pleased with how my car is performing. Shoutout to bayareass for helping me make this happen.
After running 12.0 a few weeks back I knew the car had 11's in it, just had to get back to the track and get that 60' down.
Unfortunately there was a pretty bad headwind that was slowing everyone down. I think that without the wind, the car has high 11.80's in it. But I'll probably never find out since the car is still on the stock 10 Bolt, and I don't want to grenade it at the track. Anyways here is the info...
2001 WS6 M6:
Bolt-On's
4.10's
Tune
The car did 11.93@113.7, here is the slip:
And the video:
After running 12.0 a few weeks back I knew the car had 11's in it, just had to get back to the track and get that 60' down.
Unfortunately there was a pretty bad headwind that was slowing everyone down. I think that without the wind, the car has high 11.80's in it. But I'll probably never find out since the car is still on the stock 10 Bolt, and I don't want to grenade it at the track. Anyways here is the info...
2001 WS6 M6:
Bolt-On's
4.10's
Tune
The car did 11.93@113.7, here is the slip:
And the video:
Last edited by LS1rob00; May 23, 2013 at 03:47 PM.
Thank you.
Car has Lid/TB/LT's/ORY/CB/4.10's/LS7 Clutch. As far as weight, I'm not sure. Just has basic stuff pulled out like seats and jack. Tires were a Hoosier DR.
You should! What gears are you going with? Definitely possible, just need a 60'!
Feels good though.
Last edited by LS1rob00; May 28, 2013 at 12:42 AM.
I was wondering if you were going to make an 11 second pass when I saw you post a 12.0X a couple weeks ago. Great pass!
Looks like a good example of an optimized setup considering the mods.
Parker
Looks like a good example of an optimized setup considering the mods.
Parker
I went with 3.73 because I plan on spraying later on. I will be on 26x11.5x15 et streets, and street lites, so I should 60' pretty good I hope. I will be full weight though plus I just bought all the UMI suspension pieces so it will add a little weight. If I could do very low 12's, I will be happy with that for now.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
Where does it say it makes 434?
No longtubes? impressive!
No longtubes? impressive!
Rick at Synergy Motorsports in the Bay Area, CA. Thanks!
Thanks bro!
I went with 3.73 because I plan on spraying later on. I will be on 26x11.5x15 et streets, and street lites, so I should 60' pretty good I hope. I will be full weight though plus I just bought all the UMI suspension pieces so it will add a little weight. If I could do very low 12's, I will be happy with that for now.
Just bolt ons! No cam/heads etc. Thanks!
Thanks! That's actually my goal.
No I definitely have LT's haha just didn't notice I didn't add them in there.
Thank you sir!
what launching technique do you use? what rear suspension are you running? I can't get my m6 to hook with hoosier 275 40 17drs like a 2.2 60 ft lol and have tons all rear tub parts
Dam nice time for bolt on car man!
Im having issues trying to get into the 11s, I have same mph at 1/8th and 1/4 as you but my 330/1/8 and 1000 ft mark is all slower... the 1/8th being .4 slower! Driving me nuts lol
Im having issues trying to get into the 11s, I have same mph at 1/8th and 1/4 as you but my 330/1/8 and 1000 ft mark is all slower... the 1/8th being .4 slower! Driving me nuts lol
