Bolt-On WS6 in the 11's!
#1
Bolt-On WS6 in the 11's!
Happy to say that I finally broke into the 11's! It feels good. I know it's not fast, but for my mods I am pleased with how my car is performing. Shoutout to bayareass for helping me make this happen.
After running 12.0 a few weeks back I knew the car had 11's in it, just had to get back to the track and get that 60' down.
Unfortunately there was a pretty bad headwind that was slowing everyone down. I think that without the wind, the car has high 11.80's in it. But I'll probably never find out since the car is still on the stock 10 Bolt, and I don't want to grenade it at the track. Anyways here is the info...
2001 WS6 M6:
Bolt-On's
4.10's
Tune
The car did 11.93@113.7, here is the slip:
And the video:
After running 12.0 a few weeks back I knew the car had 11's in it, just had to get back to the track and get that 60' down.
Unfortunately there was a pretty bad headwind that was slowing everyone down. I think that without the wind, the car has high 11.80's in it. But I'll probably never find out since the car is still on the stock 10 Bolt, and I don't want to grenade it at the track. Anyways here is the info...
2001 WS6 M6:
Bolt-On's
4.10's
Tune
The car did 11.93@113.7, here is the slip:
And the video:
Last edited by LS1rob00; 05-23-2013 at 03:47 PM.
#3
Thank you.
Car has Lid/TB/LT's/ORY/CB/4.10's/LS7 Clutch. As far as weight, I'm not sure. Just has basic stuff pulled out like seats and jack. Tires were a Hoosier DR.
You should! What gears are you going with? Definitely possible, just need a 60'!
Feels good though.
Last edited by LS1rob00; 05-28-2013 at 12:42 AM.
#4
I was wondering if you were going to make an 11 second pass when I saw you post a 12.0X a couple weeks ago. Great pass!
Looks like a good example of an optimized setup considering the mods.
Parker
Looks like a good example of an optimized setup considering the mods.
Parker
#7
I went with 3.73 because I plan on spraying later on. I will be on 26x11.5x15 et streets, and street lites, so I should 60' pretty good I hope. I will be full weight though plus I just bought all the UMI suspension pieces so it will add a little weight. If I could do very low 12's, I will be happy with that for now.
Trending Topics
#12
Where does it say it makes 434?
No longtubes? impressive!
No longtubes? impressive!
#14
Rick at Synergy Motorsports in the Bay Area, CA. Thanks!
Thanks bro!
I went with 3.73 because I plan on spraying later on. I will be on 26x11.5x15 et streets, and street lites, so I should 60' pretty good I hope. I will be full weight though plus I just bought all the UMI suspension pieces so it will add a little weight. If I could do very low 12's, I will be happy with that for now.
Just bolt ons! No cam/heads etc. Thanks!
Thanks! That's actually my goal.
No I definitely have LT's haha just didn't notice I didn't add them in there.
#17
Thank you sir!
#18
what launching technique do you use? what rear suspension are you running? I can't get my m6 to hook with hoosier 275 40 17drs like a 2.2 60 ft lol and have tons all rear tub parts
#19
Dam nice time for bolt on car man!
Im having issues trying to get into the 11s, I have same mph at 1/8th and 1/4 as you but my 330/1/8 and 1000 ft mark is all slower... the 1/8th being .4 slower! Driving me nuts lol
Im having issues trying to get into the 11s, I have same mph at 1/8th and 1/4 as you but my 330/1/8 and 1000 ft mark is all slower... the 1/8th being .4 slower! Driving me nuts lol