11.9 @114 foxbody
10-16-2015, 07:21 PM
#1
Teching In
Thread Starter
Join Date: Sep 2015
Location: kansas
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
11.9 @114 foxbody Been racing sportsman in my 1990 foxbody, has an ls and cam, carburetor, roll bar, 9in slicks, full 3 inch exhaust, 3.50 rear gear, th350, and mostly gutted interior. No carpets, only driver seat, dash and center console intact but not ac unit or heater core. Currently have a 4.10 rear gear I want to install, going to take heads off and port them, backcut valves if needed, flow the heads as well, change rockers and springs, possibly get new lifters, and might switch to 4.8 flat top pistons. I'm on the edge of switching to efi in a few years as well.
10-18-2015, 07:42 AM
#2
Been racing sportsman in my 1990 foxbody, has an ls and cam, carburetor, roll bar, 9in slicks, full 3 inch exhaust, 3.50 rear gear, th350, and mostly gutted interior. No carpets, only driver seat, dash and center console intact but not ac unit or heater core. Currently have a 4.10 rear gear I want to install, going to take heads off and port them, backcut valves if needed, flow the heads as well, change rockers and springs, possibly get new lifters, and might switch to 4.8 flat top pistons. I'm on the edge of switching to efi in a few years as well.