First 11 for my LT1!
03-31-2019, 05:24 PM
#1
Teching In
Thread Starter
First 11 for my LT1! Needed a better track than I normally run on. I pulled ballast and removed my launch chip to get the car out of the hole better and hit 11.91 on my first run. Backed it up with another run later in the day and tried a slightly higher shift point but didn’t help (6200 vs. 6000). I can’t post pics for some reason. Here is a link of the slips:
http://imgur.com/a/jl0BfDh
60- 1.521
330- 4.719
660- 7.440
MPH- 89.72
1000- 9.837
1320- 11.911
MPH- 107.30
I have a spragless converter that is likely hurting the back-half numbers and trapping around 6400 or so and out of steam. Just a bracket car with old, high mile engine.
http://imgur.com/a/jl0BfDh
60- 1.521
330- 4.719
660- 7.440
MPH- 89.72
1000- 9.837
1320- 11.911
MPH- 107.30
I have a spragless converter that is likely hurting the back-half numbers and trapping around 6400 or so and out of steam. Just a bracket car with old, high mile engine.
The following users liked this post:
Vicious95Z28 (09-23-2019)
03-31-2019, 05:37 PM
#2
Teching In
Thread Starter
Oh, I don’t have much info in my sig. Car has a powerglide, 9” w/ 4.71’s, 28x10.5 pbr, 8” converter 4500 stall, suspension, EWP, etc... Engine has a carburetor, but stock longblock outside of rocker arms and LT4 valve springs. Probably has 180k on engine. Headgaskets blew long ago (~160k) and got stock replacements.
Last edited by More cubes; 03-31-2019 at 08:56 PM.
