Help me lower 60ft! 6.0 s10!
#1
On The Tree
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
2000 s10 Stepside Extreme
Mono Leafs / Caltrac setup
90/10 Calvert front /Moroso Trick Springs
Viking DA rear shocks
Ford 9 inch 370 gear
th400 transbrake
3000 stall nitrous converter
Engine
6.0 /Ls3 head combo (stock bore 6.0)
custom cam from Martin 23x/25x 62x/62x
super victor intake
750 Holley
1 7/8 headers
arp everything
wisco protru dome piston
Stock rods
MT ET street @17psi
been building a few years, finally got to FL2K and was pretty happy with the results. Best pass was 11.9 @118 ... however my 60ft is 1.8-1.9 any advice?
Mono Leafs / Caltrac setup
90/10 Calvert front /Moroso Trick Springs
Viking DA rear shocks
Ford 9 inch 370 gear
th400 transbrake
3000 stall nitrous converter
Engine
6.0 /Ls3 head combo (stock bore 6.0)
custom cam from Martin 23x/25x 62x/62x
super victor intake
750 Holley
1 7/8 headers
arp everything
wisco protru dome piston
Stock rods
MT ET street @17psi
been building a few years, finally got to FL2K and was pretty happy with the results. Best pass was 11.9 @118 ... however my 60ft is 1.8-1.9 any advice?
#3
On The Tree
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Update, got a 4000 stall converter, also good for nitrous and my best time was 7.1 @99 . My best 60ft was a 1.64 but consistently around 1.7...
#4
On The Tree
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
What kind of converter are you running? and what RPM are you leaving at? Shifting?