asnxps2

Well I ran
60' 1.849
330 5.033
1/8 7.646
mph 96.58
1000 9.0871
1/4 11.707
mph 123.49
what do you guys think? I was only able to make one pass on 17" nittos spinning. Also my my clutch is not grabbing well. I was driving home and was in 6th gear and it would rev and then grab when i stepped on the accelerator. I need to know what kind of clutch to get.

nasty99WS6

SPEC stage 3. nice times.

asnxps2

I had a Spec stage 3 , I think Im going to go with a Stage 5

COMNBYU

ET is **** poor for the MPH. Get a good clutch and put some ET skreets on. You've got a 12blt, now use it. Stop monkeying around and let's see some 1.4-.5 60's


You should be running 10's...







Jon

blkZ28spt

Not bad for a single run on slipping clutch. Welcome to the club. Now, in order to get you the hell OUT of this club and into the 10's, you need a new clutch with a nice ET street or better and a hard launch.

I'm an auto guy so take it with a grain of salt, but I'd look into a high level spec, ram powergrip (i think) or the clutch I somehow decided I'd get if I switched to a built T-56 instead of rebuilding my 4L60E, a twin disk Mcleod

asnxps2

I just ordered a star spec stage 5 clutch and will see if I can overcome 11's in weeks to come. Ill try on a borrowed set of ET streets on a 16" wheel. I have only minor suspension done : sfc, lower control arms, and no front sway bar. I know my mph is good for 10's. But sometimes its easier said then done. Especially in a manual. Also my race weight is around 3900+lbs. I need to take my sub, backseats, jack/spare out the next time out. I launched at 2500 RPM spinning the tires. Next time maybe 4500-5000rpm dump.

asnxps2

Am I in the club yet?

blkZ28spt

Don't worry, I'm sure they'll get around to it before too long. I'm still waiting for my title change too.

BTW: Did you post in the sticky up top?

NXZ28

iTrader: (45)

Congrats! I agree with every one else. Once you get the bugs worked out you will be jumping to the 10 second forum.