I made it!
I made it! R/T .201
60' 1.869
330 5.183
1/8 7.743
MPH 95.90
1000 9.921
1/4 11.723
MPH 125.73
Let me know what you guys think! I wasn't real happy but the 17" M/T DR's just aren't cuttin it. I will post up a pic of the slip as soon as i can.
60' 1.869
330 5.183
1/8 7.743
MPH 95.90
1000 9.921
1/4 11.723
MPH 125.73
Let me know what you guys think! I wasn't real happy but the 17" M/T DR's just aren't cuttin it. I will post up a pic of the slip as soon as i can.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Good job! What is the dyno #'s on your car? I'm hoping to hit some 11's when I get the 9" in. You and I would be a good race, were very close it times. Is that your first 11 second pass?
I can't wait!!!
I can't wait!!!
Yeah that was my first time even driving the car after getting it back from the shop! I just showed up at the track and jumped in and went. LOL If i can hook up it should be a different story but we shall see. Don't have the money saved up yet for slicks and skinnes. I am going to muncie sometime next week possibly wednesday you going to be their?
Hey, do you have the d1sc? All forged motor too considering your running 15 psi? You must be putting down a ton of HP. Good job! Im looking to get a procharger soon. Do you have AIM and we can chat a little?
__________________
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
That 60ft is killin ya, dam with a1.6-1.5 you would be humming. Try some MT DR's or ET streets. I used to spin like crazy on nitto's and BFG's but MT's are great! I am trying to make a 11 sec pass on motor myself but have to wait for this FL weather to cool off. I made a 12.3 pass @112 on a stock converter(now replaced with a vig 3200) and track temps of 120%. Hoping with some tuning and a ported lt4 intake and weather to hit that magic 11 #. Then I will spray the motor as it was built for!
awesome let us know how it turns out. I am running M/T DR's right now but they are 17's and don't hook up with the power i am putting down. If i had an auto and if i new how to drive better LOL it would probably be a lot better. What kinda times could be possible with those kind of 60ft times.
I am putting down 650 and 650 at the wheels. I just fried my clutch yesterday at the track where i pulled a 7.39 1/8 mile with a 1.699 60ft. Wished i would have been at the 1/4mile track. Oh well time for a new clutch.