Mid 11's with mild cam only car?
#1
TECH Enthusiast
Thread Starter
iTrader: (25)
Join Date: May 2006
Location: Hinesville, GA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Mid 11's with mild cam only car?
Okay, it's actually a question, but i want input. Can you make a consistent M6, i say again, M6 run mid 11's with a cam Below 230's? Are you making up for the moderate cam with good 60 foot's, or what? if it is at all possible
#3
TECH Enthusiast
Thread Starter
iTrader: (25)
Join Date: May 2006
Location: Hinesville, GA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
no, i mean a 3500-3600 lb car, with a stock style suspension, drag radials. I am looking to tke my torquer 2 out and put in a like...224 with a 110 lsa and maybe loner pushrods, say 7.425 and try and gain some low rpms, less surging, better mpg, etc... what you guys think?possible?
#5
TECH Enthusiast
Thread Starter
iTrader: (25)
Join Date: May 2006
Location: Hinesville, GA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Not sure, had serios misfire issue i can't figure out ever since i got the cam in, went to have car tuned, thinking that was it, and nope, about 10 degrees of knoc retard at times, and tried almost every simple thing to fix it, just cnaq't figure it out
Trending Topics
#12
12 Second Club
iTrader: (1)
Join Date: Nov 2005
Location: Midland, Tx
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
i say yes but i can give you a real answer in a few weeks, i think you can if you have a really good tune guy. im putting in a 223 232, 588 575 G5x1 cam and 918 comp springs. we are hoping for 400+ rwhp along with the bolt on . ill post up in a couple of weeks to let yall know the final result
#14
10 Second Club
iTrader: (24)
Originally Posted by 98SS1LWEE
Not sure, had serios misfire issue i can't figure out ever since i got the cam in, went to have car tuned, thinking that was it, and nope, about 10 degrees of knoc retard at times, and tried almost every simple thing to fix it, just cnaq't figure it out
#18
Teching In
iTrader: (1)
Join Date: Mar 2006
Location: hinesville, ga
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
hey paul we gotta work on mine since if i didnt have my drive shaft loop i wouldnt be here.... broke the shaft....bent my spohn tourque arm crushed my exhaust...n screwed up my 12 bolt and destroyed the trans.... all taking on a bike lol
#19
TECH Enthusiast
Thread Starter
iTrader: (25)
Join Date: May 2006
Location: Hinesville, GA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
oh man, sounds like wegot two cars needing serious work. you home this week? Gonna try swapping coil packs and see if they help anything, don't think they'[re bad though