My 370 buildup (for F1 procharger) WARNING: long post & lots of pics!
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Made a little more progress tonight. Got the AIT bung welded on. I decided to put it on the bottom of the pipe so the sensor isnt visable from looking down into the engine bay. Just makes for a cleaner appearance. I need to go back over the pipe again with some paint, but here is the result of tonight's progress:
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Surgery is complete! 
I'm just waiting for the computer now to get back from the tuner for the initial rough baseline tune to get her running enough if nothing else to just be able to load it up on a trailer and take to the dyno for the tune. I will be running this setup with a MAF tune for now. Plans are to go to a SD tune here eventually, but for now, it will be MAF.
I'm just waiting for the computer now to get back from the tuner for the initial rough baseline tune to get her running enough if nothing else to just be able to load it up on a trailer and take to the dyno for the tune. I will be running this setup with a MAF tune for now. Plans are to go to a SD tune here eventually, but for now, it will be MAF. Last edited by ChevyChad; Jul 26, 2009 at 10:08 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
lmao hell yeah! I'll let ya know when I'll be in OKC for the tune man 
God damn thats sexy all put back together man. Great job. I know how long the car has been down & how much it sucks. I can't even imagine how giddy you feel to fire it up, get it tuned & lay into it for the first time. Enjoy brotha.
Thread Starter
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Welp, she's alive! 
Got the computer back today, and she fired right up after priming. Well, not exactly right up.. It needed a little assistance from me holding the throttle slightly down. I temporarily adjusted the screw for now, but I'm gonna have to drill the hole out in the new TB to probably something close to the size of the hole in my old TB blade. I took some vids with my camera, but the microphone is absolutely horrible with it. I then tried to take some vids with my cell phone, but the mic on it doesnt register too well either 
I'll have to borrow a camcorder and get back with yall, so stay tuned 
I'm suprised at how well it idles with those 80# injectors. Glen did an awesome job on setting them up with the very limited information he had. Next step is dyno tuning 
Got the computer back today, and she fired right up after priming. Well, not exactly right up.. It needed a little assistance from me holding the throttle slightly down. I temporarily adjusted the screw for now, but I'm gonna have to drill the hole out in the new TB to probably something close to the size of the hole in my old TB blade. I took some vids with my camera, but the microphone is absolutely horrible with it. I then tried to take some vids with my cell phone, but the mic on it doesnt register too well either I'll have to borrow a camcorder and get back with yall, so stay tuned I'm suprised at how well it idles with those 80# injectors. Glen did an awesome job on setting them up with the very limited information he had. Next step is dyno tuning 
Welp, she's alive! Got the computer back today, and she fired right up after priming. Well, not exactly right up.. It needed a little assistance from me holding the throttle slightly down. I temporarily adjusted the screw for now, but I'm gonna have to drill the hole out in the new TB to probably something close to the size of the hole in my old TB blade. I took some vids with my camera, but the microphone is absolutely horrible with it. I then tried to take some vids with my cell phone, but the mic on it doesnt register too well either I'll have to borrow a camcorder and get back with yall, so stay tuned I'm suprised at how well it idles with those 80# injectors. Glen did an awesome job on setting them up with the very limited information he had. Next step is dyno tuning
Got the computer back today, and she fired right up after priming. Well, not exactly right up.. It needed a little assistance from me holding the throttle slightly down. I temporarily adjusted the screw for now, but I'm gonna have to drill the hole out in the new TB to probably something close to the size of the hole in my old TB blade. I took some vids with my camera, but the microphone is absolutely horrible with it. I then tried to take some vids with my cell phone, but the mic on it doesnt register too well either I'll have to borrow a camcorder and get back with yall, so stay tuned I'm suprised at how well it idles with those 80# injectors. Glen did an awesome job on setting them up with the very limited information he had. Next step is dyno tuning Once you get he lined out give me a call, I'd love a ride in that beast. You having Glenn do the final tuning? Or you goin with someone else & a SD tune?