12.48 at track today... video inside
Thread Starter
Joined: Jan 2008
Posts: 92
Likes: 0
From: Texas State/Friendswood
well went back out to the track today and still havent gotten any better tires..but i managed to run a 12.48 at 117.1 with a 2.16 60ft and a 12.55 at 119...
still on the stock 245s couldnt hook to well but its whatever....
got a few mods planed
so i should be in the 11s soon
http://www.youtube.com/watch?v=2Rf0j4zaAJg
still on the stock 245s couldnt hook to well but its whatever....
got a few mods planed
so i should be in the 11s soon http://www.youtube.com/watch?v=2Rf0j4zaAJg
Thread Starter
Joined: Jan 2008
Posts: 92
Likes: 0
From: Texas State/Friendswood
m6, stainless works long tubes, stainless works y pipe, cutout, lid, 229/236 cam, ls2 timing chain, tune (a bad one) and a stage 2 built tranny...with some slicks i think it will be..at least i hope!
DAMN 119mph on stock heads/intake etc? Damn you have a strong one there.... Did you weigh it? The air was pretty good that night.... I went a 13.53 in a bone stock, brand new G8 w/400 miles so I knew the air was good. Track sucked though.
Wow!! We would be a good race, I ran a 12.5 at 119 with a sorry *** 2.3 60'. That was on the spray, I thought for sure you were running nitrous when I first saw your MPH. Good run though
Trending Topics
well went back out to the track today and still havent gotten any better tires..but i managed to run a 12.48 at 117.1 with a 2.16 60ft and a 12.55 at 119...
still on the stock 245s couldnt hook to well but its whatever....
got a few mods planed
so i should be in the 11s soon
http://www.youtube.com/watch?v=2Rf0j4zaAJg
still on the stock 245s couldnt hook to well but its whatever....
got a few mods planed
so i should be in the 11s soon http://www.youtube.com/watch?v=2Rf0j4zaAJg
Oh yeah..its light..... Mine is a heavy pig.....With me in it it was 3720lbs before the 9" and steel drive shaft, now its 3886lbs with full tank of gas and a full bottle...
You got me covered by about 4 mph on motor...
I see your car at the Kemah show from time to time.
You got me covered by about 4 mph on motor...
I see your car at the Kemah show from time to time.
Thread Starter
Joined: Jan 2008
Posts: 92
Likes: 0
From: Texas State/Friendswood
jeez...its time for some weight reduction...
whats your car running cam only?
ya i try to head out as much as i can but i usually work saturday nights...but ya next time were both there i wanna check out your car..
whats your car running cam only?
ya i try to head out as much as i can but i usually work saturday nights...but ya next time were both there i wanna check out your car..
Yeah its a heavy pig.....The 9" and steel nitrous driveshaft added about 180lbs.... then the Z06 replica wheels are heavy as hell, especially compared to the stock 16" 5 stars. Also lots of heavy suspension stuff...(LCAs, SFCs, TA, PHB, RSB, nitrous stuff and full bottle) Everything else is still intact, even the smog pump etc.... I probably won't do much to reduce weight other then slap on some runners on the front and the stock 16s on the back w/ ET Streets. I want to keep it as mint/perfect as possible so.... I just need a motor to pull this pig. Probably doing a HKE 4xx" during the winter, depending on this **** economy. Haven't ran it with the 9" yet, waiting to get some ET Streets... I figure it will probably go some 12.20s or so on motor...prolly about 113-114. Not that great really...
Thread Starter
Joined: Jan 2008
Posts: 92
Likes: 0
From: Texas State/Friendswood
Nice...i really need some suspension stuff bad!!...i just sold my truck so im looking for some slicks right now and if i can get some before sunday then im gonna head back out there and see what happens..







