00blueLS1

Damn thats impressive!!

79TAKid

iTrader: (1)

Here is a video with the heads and cam and headers on it.... Like the video says, tune isnt 100% yet and its launching really sluggishly. Not coming on hard till about 30 ft out, would got 11.30s easy if the 60' was there.

http://www.youtube.com/watch?v=_jNEL_YrsaA

I guess I should post in the 11 second category now! lol

MR_M

iTrader: (5)

Your car runs hard man, good stuff

layz

what exactly do you have done to the suspension...pc by pc..whats done...qa1 supsension i know that buy what...let us know...parts numbers maybe.

nitrouspowrdss

iTrader: (2)

Why do you do dry hops???

KevinR

That is impressive

lemons12

iTrader: (71)

Congrats but that launch is ugly.. get a drag bar and it will be a much nicer launch, help 60 also.

Nice h/c times man, keep it up.

blackfbird98

why would u consider that an ugly launch? just curious not tryin to be a dick or anything.

Zmg00camaross

iTrader: (11)

Was wondering this also.

lemons12

iTrader: (71)

Because body is twisting so bad.. Would be a much nicer launch with a drag bar or even an air bag in RR wheel would help.
Not to mention it would sixty harder. I cut high 1.4 short times on motor full weight and niether tire comes up.. wheelies are not good, might be cool.. there is a reason the majority of posts in here are from 2009 and up members.. He has already stated it has hurt his times.

Like i said though, he is running some good times for sure.. Just shows there is more in the setup and he knows it.

wicked383lt1

That's awsome!! Now I'm just waiting for the mustang guys to run in here and say the new gt does the same.

lemons12

iTrader: (71)

If you don't want to hear about it, don't bring it up.

airforcemanss

iTrader: (23)

kudos on making the video in the 1st post with the slow motion.

also, can you please give us and updated list of your mods with your new heads/cam setup?

what settings on qa1's? stock springs im assuming?

dodson55

iTrader: (18)

Nice car

1BAD98LS1

iTrader: (33)

I bet if you put a larger rear sway or drag bar on the rear both tires with see air. Looks nice

Scoobysnacks

iTrader: (1)

My guess is he may have a Detroit Locker differential. Those require a dry hop to make sure they are locked after the burnout. Or he is just making sure he heated the tires enough to hook.

m_liel

^ Bingo!

projectX

iTrader: (51)

Nice runs!!

79TAKid

iTrader: (1)

oh I was just making sure the tires were heated enough since it wasnt hooking with the sway bar(s) off. With the 10 bolt I just had a regular posi, I have a spool in the 12 bolt