Its that time of the year again. PB time.
haha ya i know that feeling they do that **** on street night at LVD but i havent been to NED yet i want to go i hear the DA is better there. I could try one of these days (if my rear end doesnt blow before then) but its about 2.5 hrs from me and lebanon is about an hour
certainly got me a new pb tonight 12.457 @ 110.24. i was parked next to you in the pits but you took off before i made my way over.
prob last outting for me this year, i misshifted and blew something up in the top end of the motor.
prob last outting for me this year, i misshifted and blew something up in the top end of the motor.
Holy **** man what you think it is? That's ******* awful I'd say. Congrats on the 12.4 but not at that cost sorry man
haha ya i know that feeling they do that **** on street night at LVD but i havent been to NED yet i want to go i hear the DA is better there. I could try one of these days (if my rear end doesnt blow before then) but its about 2.5 hrs from me and lebanon is about an hour

I didnt get the da that you got but results were good! I will post in the forum below the 12s forum

Thanks Joe and now I want your Vette!

Oh you have the orange yea there was so many people over there I didnt know whos it was lol. Thats a nice car I like that hood! I saw you run a bunch of times and looks like those hoosiers did the job for ya. Your car runs great! I wish I went with hoosiers again this time around cause these mts are 7lbs a piece heavier!
Damnit I hope your car isnt messed up to bad. I hate that.
Congats on the new pb though man your car ran great thanks to a good driver!
Ill work on a thread and post asap. I was lucky that Brian (BDKZ28) was there and he got the 2nd best of one of my runs on vid. So you will see the vid in the thread. Thanks to Brian!
Oh you have the orange yea there was so many people over there I didnt know whos it was lol. Thats a nice car I like that hood! I saw you run a bunch of times and looks like those hoosiers did the job for ya. Your car runs great! I wish I went with hoosiers again this time around cause these mts are 7lbs a piece heavier!
Damnit I hope your car isnt messed up to bad. I hate that.
Congats on the new pb though man your car ran great thanks to a good driver!
Damnit I hope your car isnt messed up to bad. I hate that.
Congats on the new pb though man your car ran great thanks to a good driver!
i usually run MT ET street radials on my car but they wont pass tech so i borrowed my buddies hoosier quick time pros, first time i ran the car on bias plys. sucks cause it probably would have went a little quicker if i was running my radials but oh well. all in all it was kinda a bad night for me, had a couple things workin against and ended up breaking it but atleast i ran a good ET, prob the only thing keeping me from being really pissed!
your car goes really good, i watched that video, you pulled the left front a little bit on that run!
yeah that was me! thanks! im actually considering buying BKDs old hood, the cowl is just to big for my taste!
i usually run MT ET street radials on my car but they wont pass tech so i borrowed my buddies hoosier quick time pros, first time i ran the car on bias plys. sucks cause it probably would have went a little quicker if i was running my radials but oh well. all in all it was kinda a bad night for me, had a couple things workin against and ended up breaking it but atleast i ran a good ET, prob the only thing keeping me from being really pissed!
your car goes really good, i watched that video, you pulled the left front a little bit on that run!
i usually run MT ET street radials on my car but they wont pass tech so i borrowed my buddies hoosier quick time pros, first time i ran the car on bias plys. sucks cause it probably would have went a little quicker if i was running my radials but oh well. all in all it was kinda a bad night for me, had a couple things workin against and ended up breaking it but atleast i ran a good ET, prob the only thing keeping me from being really pissed!
your car goes really good, i watched that video, you pulled the left front a little bit on that run!
Yea! I didnt even know BDK was getting that vid. It was a nice surprise. I wanted to get a good run in before they closed but that car crashed and that was that. I think I might go up on a early morning test and tune to see how much better time I will get with a -1000 da lol
I hope you get that figured out and its not to bad to fix man.
theyre completely bald in the center, theyre real sticklers up there about that stuff. theyve been givin me **** since they hit the wear bars, every time i go to tech in it takes an extra 5-10 min because 3 people have to look at the tires before they pass me. so i didnt even bother with them this time, even tho i know they are safe and they still hook great.
i havent tried the hoosier DRs, theyre probably pretty good but for whatever reason theyre 275 50 15s run way small, they advertise them at 25.7" which wouldnt work with my gears.
i havent tried the hoosier DRs, theyre probably pretty good but for whatever reason theyre 275 50 15s run way small, they advertise them at 25.7" which wouldnt work with my gears.
I know what you mean. Last summer they failed me on my rear tires. Then this year the same guy failed me for having a small rip in my pants lol. At least he let me go to walmart to get some new pants wtf. Couldnt believe it.
they failed you for a rip in your pants? thats BS. ive been there almost every wednesday and it seems like every time i go theyre trying to target something else on my car even tho theres nothing wrong. this past time the guy asked if i had a driveshaft loop, and sfi balancer lol. i teched in on my zr1s mind you. i politely told him the engine was stock and that i do have a safety loop but i dont need one on a DOT tire.
yea dude I couldnt believe it! total bs. its that one older guy up there that always gave me bs. i always try and avoid him if possible. you dont need a dsl untill what 11.9 this year? maybe they were still thinkin bout last years rules. i think it was 12.5 or something like that. but yea on dot tire idk.
a friend of mine failed tech for torn pants last year , I loaned him some duct tape so he could pass tech....
for tires when a pair of dr's I had for one of my fwd cars failed on wed ( they were fine for fridays since slicks are allowed) I started passing tech on street tires ad swap after one pass to my dr's ....
everyones issues solved lol
for tires when a pair of dr's I had for one of my fwd cars failed on wed ( they were fine for fridays since slicks are allowed) I started passing tech on street tires ad swap after one pass to my dr's ....
everyones issues solved lol

a friend of mine failed tech for torn pants last year , I loaned him some duct tape so he could pass tech....
for tires when a pair of dr's I had for one of my fwd cars failed on wed ( they were fine for fridays since slicks are allowed) I started passing tech on street tires ad swap after one pass to my dr's ....
everyones issues solved lol
for tires when a pair of dr's I had for one of my fwd cars failed on wed ( they were fine for fridays since slicks are allowed) I started passing tech on street tires ad swap after one pass to my dr's ....
everyones issues solved lol

The pants thing is just retarted!
The Vette runs Good for Just for ARH 1 7/8 LT & 3''X-pipe,Air Intake & a Tune in Good Air it will run mid 11's w/ 2:56's and 28 MPG on the Highway !!!!Maybe a stall soon for low 11's i will see !!






