Here I am
#1
12 Second Club
Thread Starter
iTrader: (13)
Join Date: Feb 2005
Location: Gateway International Raceway
Posts: 1,575
Likes: 0
Received 1 Like
on
1 Post
Here I am
02 SS with Mods:
1. K&N Filter;
2. Eibach Prokit;
3. BMR SFC's (weld on); BMR STB;
4. Baer Eradispeeds installed with pictures on page 3,
And on page 4(under construction)
5. JET-HOT LONGTUBE HEADERS, and Catted Y-pipe;
6. FFHP S2 Heads w/ Intake 2.02 REV LS1 valves, Exhaust 1.60 REV LS1 valves, Combustion chamber approx 64cc's, Intake runner approx 225cc's, Exhaust runner approx 83cc's, Dual LS1 Gold springs with titanium retainers, springs good to .650 lift,
7. Thunder Racing cam 224/224 .563/.563 114 LSA,
8. SDPC HD dual roller timing chain,
9. MSD 8.5 wires,
10. NGK TR55's,
11. Hypertech 180* Thermostat
12. TR 7.4 chromemoly pushrods
13. Tuning by RWTD .
14. Magnaflow catback
15. Bilstein shocks
16. Purchased Yank SS3200, B&M tranny cooler
17. Nitto 555's put on 5 Dec. 2005
18. BMR lower control arms
R/T 1.317
60' 1.959 (need sticky tires)
330' 5.567
1/8th 8.043 @ 89.866
1/4 12.429 @ 111.115
Well I just got home from the KYHorsepower shootout. I took 2nd in the bracket racing...if I had not spotted the guy 1 second off the tree I would have won. Just shows what a momentary lapse in attention will do. Anyway here are my new times, was hoping for better but I could not get traction for SH*T.
Will post the timeslip when I get home next week. My times were crazy anywhere from 12.4 to 13.1 @ 109 to 113...not the epitome of consistency without some sticky tires.
1. K&N Filter;
2. Eibach Prokit;
3. BMR SFC's (weld on); BMR STB;
4. Baer Eradispeeds installed with pictures on page 3,
And on page 4(under construction)
5. JET-HOT LONGTUBE HEADERS, and Catted Y-pipe;
6. FFHP S2 Heads w/ Intake 2.02 REV LS1 valves, Exhaust 1.60 REV LS1 valves, Combustion chamber approx 64cc's, Intake runner approx 225cc's, Exhaust runner approx 83cc's, Dual LS1 Gold springs with titanium retainers, springs good to .650 lift,
7. Thunder Racing cam 224/224 .563/.563 114 LSA,
8. SDPC HD dual roller timing chain,
9. MSD 8.5 wires,
10. NGK TR55's,
11. Hypertech 180* Thermostat
12. TR 7.4 chromemoly pushrods
13. Tuning by RWTD .
14. Magnaflow catback
15. Bilstein shocks
16. Purchased Yank SS3200, B&M tranny cooler
17. Nitto 555's put on 5 Dec. 2005
18. BMR lower control arms
R/T 1.317
60' 1.959 (need sticky tires)
330' 5.567
1/8th 8.043 @ 89.866
1/4 12.429 @ 111.115
Well I just got home from the KYHorsepower shootout. I took 2nd in the bracket racing...if I had not spotted the guy 1 second off the tree I would have won. Just shows what a momentary lapse in attention will do. Anyway here are my new times, was hoping for better but I could not get traction for SH*T.
Will post the timeslip when I get home next week. My times were crazy anywhere from 12.4 to 13.1 @ 109 to 113...not the epitome of consistency without some sticky tires.
Last edited by ExceSSive; 03-26-2006 at 05:27 PM.