what mods to get????
Joined: Dec 2001
Posts: 12,829
Likes: 30
From: Central Indiana Honors: 4th grade spelling bee contestant
Just look at the signature. There all there with the exception of the Fuddle 3400 torque converter getting dropped in next week. This will help lower 0-60 ft times as well as increase overall performance in the car on street or strip. If I had to do it all over again the Stall would be one of the first mods I would have done. No serious regrets about how i've done it though. Lid, Cold air induction, Bellows and MAf along with Magnaflo (love the sound) came first. Used a hand helt tuner that tied these mods together (Jet performance) Ran very low 13's(13.2-13.3) with this setup. The car litteraly just woke up and became Nasty. Then came the Pacesetter coated LT's with a Catted Y pipe from TSP followed by a tune (professional tune when adding headers and Y pipe a must). Handhelds will only take you so far. Goal is to build a low 12 or high 11 sec car with no cage as this is my daily driver. Tryin to do it with just bolt ons and the plan is working. Good luck! Come join us.
The times listed below occured on a very hot and humid Texas night with no slicks. Everybody was runnin shitty that night. Will be headed back in july to see what it does then. Less humidity I hope.
The times listed below occured on a very hot and humid Texas night with no slicks. Everybody was runnin shitty that night. Will be headed back in july to see what it does then. Less humidity I hope.
Trending Topics
Free mods, lid, cutout and tune got me this, on shitty Kumhos with a full tank of gas.
http://i5.photobucket.com/albums/y16...02z28/best.jpg
http://i5.photobucket.com/albums/y16...02z28/best.jpg
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo I have a 1/8 mile track where i live and the best i ran was a 8.6 but that was when it started geting a little cold all i had was a hooker catback. I have M6 so its hard to get it the same all the time. This summer the best was a crapy 9.0xxx and i had whats in my sig. I need a better launch my clutch will not hold up if i launch hard.
Joined: Dec 2001
Posts: 12,829
Likes: 30
From: Central Indiana Honors: 4th grade spelling bee contestant
Originally Posted by TRANSAM_2000
does anyone have a list of all the bolt-ons that i could do thanks?
Originally Posted by y2k_ta
Originally Posted by TRANSAM_2000
does anyone have a list of all the bolt-ons that i could do thanks?
everyone says with a LS6 intake and a tune, 2-3 tenths will be dropped
DR's 1-2 tenths
but before all the mods- 12.97@ 110 Lid, catback, spec stage 3 clutch and free mods. thats before i learned how to launch it on street tires..
I saw a 2002 WS6 with just a drop in K&N filter run a 12.98 @ 109
11 Second Club
Joined: Oct 2005
Posts: 1,847
Likes: 1
From: Sandwich, IL
Originally Posted by TRANSAM_2000
I need a new clutch because I'm still running my stock one with 67,800 miles on it.
Good Luck.
Teching In
Joined: Jun 2006
Posts: 9
Likes: 0
Originally Posted by 00cls1camaross
you need some sticky tires and lid, catback, ory, and headers
or maybe just sticky tires....
or maybe just sticky tires....