i kno like everyother post is asking this but i wanna kno, haha

02 ss,auto, stock trans, hypertech, slp lid, longtube headers, ory, sfc, bfg DR, 3.73 gear, 3in exhaust back, maybe a cutout, i dunno if i can get one b4 then....:-\....

 

it will be close if you can cut a good 60'

 

Dude my neighbor ran a 12.58 at 112 with the exact same mods .Gotta let it cool down,he had m/t drag radials.You should be able to pull 12.90's in hot weather with a good cool down no problem.

 

I ran a few 12.9's with simular mods(3.42 gear) and no drag radials..added a 3400 stall and nitto DR's, now running 12.6's with a best of 12.4. No weight reduction. Heat those BFG's up, bring up the rpms to just before the car wants to break loose and nail it to the floor... keep it in drive, netted me the best results in over 200 passes. My best times were from flashing the stall from a dead stop, but it is super hard on the car. Traction should not be a issue with the stock stall and the heated up BFG's.

 

ls1s with long tubes r almost guarnteed 12s.