TSP MS4 cam, and spray?
#1
10 Second Club
Thread Starter
iTrader: (12)
Join Date: May 2004
Location: Chicago IL/ Lake Geneva WI
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
TSP MS4 cam, and spray?
In the middle of a swap, wondering if I should go all out with a big cam. Would a MS4 work on the gun? I know the G5X4 will work with a hit. Anyone spraying big NA cams?
#18
9 Second Club
iTrader: (21)
heres the thread with all the details etc.
https://ls1tech.com/forums/nitrous-o...yup-i-did.html
should go 9.50s here soon with the same setup.
https://ls1tech.com/forums/nitrous-o...yup-i-did.html
should go 9.50s here soon with the same setup.
#20
TECH Enthusiast
iTrader: (36)
Join Date: Jul 2007
Location: Omaha, NE
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
You also understand this is a mustang dyno right? the numbers are going to be lower b/c the dyno applies a load to the car as if you were driving unlike dynojets where your just on rollers. Also i shut the spray off at 6100 and spun the car to 6800. If i decided to spray farther it would have put down more. I ran numerous 600+rwhp cobras according to dynojet numbers and pulled away from them and they were decent drivers