NOS mini controller wiring ?
Thread Starter
10 Second Club
iTrader: (6)
Joined: Mar 2007
Posts: 952
Likes: 0
From: Fuquay Varina, NC
NOS mini controller wiring ? I have the NOS 15974 mini controller. The controller has two heavy gauge wires to use for both stages to the solenoids. The diagram shows to wire them straight to the solenoids without any relays between the controller and the noids. The only power source to the controller is a small gauge white wire for the coming from the main switch.
Can I put relays between the controller and the solenoids? I don't see How that one small wire can support the current for the solenoids. This is the wiring diagram.
http://www.jegs.com/InstallationInst.../741-15974.pdf
Can I put relays between the controller and the solenoids? I don't see How that one small wire can support the current for the solenoids. This is the wiring diagram.
http://www.jegs.com/InstallationInst.../741-15974.pdf
Thread Starter
10 Second Club
iTrader: (6)
Joined: Mar 2007
Posts: 952
Likes: 0
From: Fuquay Varina, NC
Thread Starter
10 Second Club
iTrader: (6)
Joined: Mar 2007
Posts: 952
Likes: 0
From: Fuquay Varina, NC
On The Tree
Joined: Sep 2003
Posts: 180
Likes: 0
From: Tennessee
I am trying to hookup a 15974 NOS progressive controller to an MSD 8625 Timing Twister for my stage 1 retard. Love the diagram in the post above 
It is my understanding the yellow ch1 output control wire outputs a ground signal. Would this be the trigger I would use for the MSD retard? Since it is a ground output I assume I would use a relay to "convert" to a +12V signal?
Thanks
Mark
It is my understanding the yellow ch1 output control wire outputs a ground signal. Would this be the trigger I would use for the MSD retard? Since it is a ground output I assume I would use a relay to "convert" to a +12V signal?
Thanks
Mark
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Teching In
Joined: Jul 2009
Posts: 8
Likes: 0
From: Greensboro NC
I am trying to hookup a 15974 NOS progressive controller to an MSD 8625 Timing Twister for my stage 1 retard. Love the diagram in the post above
It is my understanding the yellow ch1 output control wire outputs a ground signal. Would this be the trigger I would use for the MSD retard? Since it is a ground output I assume I would use a relay to "convert" to a +12V signal?
Thanks
Mark
It is my understanding the yellow ch1 output control wire outputs a ground signal. Would this be the trigger I would use for the MSD retard? Since it is a ground output I assume I would use a relay to "convert" to a +12V signal?
Thanks
Mark
