C5 Single Front Mount 91mm Turbo Kit Done [PICS]
#1
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Aug 2004
Location: Missouri
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
C5 Single Front Mount 91mm Turbo Kit Done [PICS]
Here are some pictures on my now turbo FRC. To my knowledge it is the only bolt in single front mount kit out there to retain all accessories in their factory location. 417 Motorsports built the headers, downpipe, y-pipe, intake elbow, radiator, IC, well everything that needed to be designed and fabricated. The quality of their work is outstanding. Here are a ton of pictures showing how the kit is laid out. The only thing remaining is to make the air canister lines. Pictures don't have some heat shields and air shroud in place.
This kit was designed to keep my street car just that and be over 4 digits with good gas. LME built the motor for this project, they were awesome to deal with. On pump gas it will leave tread all the way through 4th until you lift. Once the turba is spooled things get crazy.
Thanks to everyone that had a hand in this project!
S91mm turbo from Forced Inductions
Getting started
Layout made
Headers done
Collector
Everything is coated inside and out
4" Downpipe
Y-Pipe
Coils relocated to clean things up
Upgraded fuel system
Custom intercooler and radiator support
Almost done
If you want to see the car exterior I just posted pictures in another thread. https://ls1tech.com/forums/multimedia-exchange/814213-pics-custom-2-tone-paint-done.html
This kit was designed to keep my street car just that and be over 4 digits with good gas. LME built the motor for this project, they were awesome to deal with. On pump gas it will leave tread all the way through 4th until you lift. Once the turba is spooled things get crazy.
Thanks to everyone that had a hand in this project!
S91mm turbo from Forced Inductions
Getting started
Layout made
Headers done
Collector
Everything is coated inside and out
4" Downpipe
Y-Pipe
Coils relocated to clean things up
Upgraded fuel system
Custom intercooler and radiator support
Almost done
If you want to see the car exterior I just posted pictures in another thread. https://ls1tech.com/forums/multimedia-exchange/814213-pics-custom-2-tone-paint-done.html
Trending Topics
#14
LS1Tech Sponsor
iTrader: (65)
Very nice! What CI did you go with?
__________________
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed