oil routing in lsx blocks
Thread Starter
TECH Regular
iTrader: (18)
Joined: Feb 2005
Posts: 440
Likes: 0
From: brunswick, ohio
oil routing in lsx blocks https://ls1tech.com/forums/generatio...e-problem.html
I have a post in internal engines, thought maybe someone here could help.
I beleive it would work if the front or rear fitting extended past the oil galley or the front to back oil galley that feeds the oil filter was pluged. I think that is what is refered to in the second pic, push past feed and plug the galley behind the feed??
I have a post in internal engines, thought maybe someone here could help.
I beleive it would work if the front or rear fitting extended past the oil galley or the front to back oil galley that feeds the oil filter was pluged. I think that is what is refered to in the second pic, push past feed and plug the galley behind the feed??
Last edited by sparkwirez06; Sep 5, 2012 at 05:23 PM.
Yes it will work. As long as the divider is not removed from the galley and the factory filter holes are plugged. All you are doing is substituting the remote filter for the factory location. I see no issues with it. 
