![Ethan[ws6]'s Avatar](https://ls1tech.com/forums/customavatars/avatar139269_2.gif){kind=avatar}
4L60e disassembly knowledge needed
Thread Starter
Teching In
Joined: Dec 2011
Posts: 24
Likes: 0
4L60e disassembly knowledge needed So im tearing into my 4L60E. I have disassembled the valve body and removed the 2-4 accumulator. I pryed my front pump loose and it came out about an inch.. inch and a half. It wont come out any further. I pryed and pulled and nothing. Any ideas? do i need some bigger guns to pry on this or what? ive done a few 4wd 4ls but this is my first 2wd. Is there something I'm missing? Is there a snap ring that holds in the input clutch assembly or does it come out w/ the pump?
Trending Topics
You are about to or have already broken your tcc switch,(it's the thing being held with two bolts right under your pump,) you have to pull it out first... slow down get a book atsg 4l60e manual can be ordered online or from a local Dacco/Detroit transmission supplier.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
