broken shifter
01-16-2002, 11:52 PM
#1
Teching In
Thread Starter
Join Date: Jan 2002
Location: Rapid City, SD
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
broken shifter I have the A4 Auto in my z28 and the little orange indecatore that tells you what gear you are in now has a mind of it's own. it just slides around in the shifter console by it's self... does anybody have a clue how to fix this or were to start? i can get underneath there... but i haven't got a clue how to removed the cover containing the indicator... i can't figure out how to get the **** off the shifter... <img src="gr_sad.gif" border="0"> really stumped on this one guys any help is greatly appriciated!
[ January 16, 2002: Message edited by: Matt Jeschke ]</p>
[ January 16, 2002: Message edited by: Matt Jeschke ]</p>
01-17-2002, 09:05 AM
#2
TECH Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
Re: broken shifter There is a little U shaped clip that holds the **** on the shifter (it looks like a thick staple). Use a small screwdriver and pry this clip out of the shift **** (I can't remember whether it's on the engine side or the trunk side of the shifter, but it's down on the neck of the ****).
Once you get the **** off, popping off the A4 panel is cake. Inside there, you should be able to take the rest of it apart and see what's going on.
Good luck,
Andrew
Once you get the **** off, popping off the A4 panel is cake. Inside there, you should be able to take the rest of it apart and see what's going on.
Good luck,
Andrew