F-body switchplate progress - new prototypes!!! Check'em out.
#26
9 Second Club
iTrader: (11)
whats the possibilty of getting 5 or 6 of those switches in that area? i just relocated my cutout switch but i still have the n20, warmer, purge, line lock, 2 step and fan switch. but i may get rid of the fan control as i never use it. and any color besides mirror? like black or dark grey? this is for an m6 also btw.
#27
TECH Fanatic
iTrader: (2)
Join Date: Jan 2007
Location: Ashland & Lexington, KY
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
I'll honestly probably forget. I have a lot on my mind everyday. I'm a senior at UK in business administration, have a newborn baby, a wife, and I run this business everyday. I juggle many roles everyday, and I tend to be forgetful sometimes. However, I always update the masses on this board when new products are available. Just try to keep an eye peeled - you will not be disappointed.
Anyway, awesome piece.. Makes me want to buy a kit just for this piece.
#28
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
whats the possibilty of getting 5 or 6 of those switches in that area? i just relocated my cutout switch but i still have the n20, warmer, purge, line lock, 2 step and fan switch. but i may get rid of the fan control as i never use it. and any color besides mirror? like black or dark grey? this is for an m6 also btw.
And yes, I will have these available in a variety of colors. The mirror pieces are just done as prototypes.
#29
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
I drive the Camaro to class nearly every time I go. I have classes Tuesday and Thursday. I park in Commonwealth Stadium's lot. Nice to see some fellow Kentuckians. I am originally from Chicago, but moved here when I started highschool.
Last edited by dragonZ28; 10-27-2008 at 01:27 AM.
#30
9 Second Club
iTrader: (11)
I could put 6 switches in the ashtray, but you'll have to do some cutting in the bottom of the tray. There are clearance problems underneath in certain areas, but a Dremel Tool can fix that in a flash
And yes, I will have these available in a variety of colors. The mirror pieces are just done as prototypes.
And yes, I will have these available in a variety of colors. The mirror pieces are just done as prototypes.
#38
TECH Apprentice
iTrader: (41)
Join Date: Dec 2006
Location: Lebanon, Pa
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
can you make a hole where you have the skull for my push button engine start? it would need to be in the same shape but I would gladly send you the push button starter to make the panel. Then i would just want 2 switches to the left of it but i could those myself if it is just a blank panel.
#39
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
can you make a hole where you have the skull for my push button engine start? it would need to be in the same shape but I would gladly send you the push button starter to make the panel. Then i would just want 2 switches to the left of it but i could those myself if it is just a blank panel.
UPDATE: For those wanting these, I have ordered the material, and these will be available this weekend in black; your choice of colored lettering or backlighting. All orders will be considered custom and may take a week to ship out. I'll need to know what labels you want on these switches. If you want a switch other than the rocker and momentary switch you see here, you'll have to send me the switch to incorporate into the panel. The price for the panels as you see them above, 3 rocker switches, 1 momentary switch will be $50 + shipping. These will adhere with 3M double-sided tape, so consider them permanent once they mount. This acrylic will likely crack if you attempt to remove it once the tape has bonded. Mirrored stainless plates are not yet available, but I'll have them available soon. The stainless pieces cannot be backlit.
If you would like one of these plates, email us at sales@emblempros.com and we'll get your payment and prepare to get yours done ASAP once the material arrives. At the moment, these will be available in black and silver (as shown). We are now accepting preorders. Remember the M6 plate is not for preorder yet because it hasn't been designed. The A4 plates for the ashtray, and the universal cubbyhole plate are currently available for preorder.