Where can I find Blazertech fogs for a TA?
09-19-2003 | 05:11 PM
#1
Where can I find Blazertech fogs for a TA? Ive been told I could find them at Walmart, but all the ones in my area dont carry them. Is there anywhere else I can find them? Maybe online? I did see some called Cyberwhite, but they look too blue for me. Thanks
09-19-2003 | 08:21 PM
#2
TECH Fanatic
Joined: Jul 2002
Posts: 1,206
Likes: 0
From: San Antonio Texas
Re: Where can I find Blazertech fogs for a TA? I bought mine online from the grand prix store. Heres the link:
http://www.pfyc.com/store/merchant.m...ory_Code=GPEXT
I have a ton of before/after pics if your interested ill email them to you. I've had them on my car for around 5 months and drove with them on everytime I drove the car.
I have a short circuit now. Everytime I turn my fogs on I blow a fuse and that ends up disabling my gauge lights as well as the tail lights. This sucks but I dont know if I am the only person that ran thru this problem yet. I would try asking around if I were you just to be on the safe side.
Funny thing is my tail lights work when I turn my hazards on at night (so people can see me in the dark and avoid paying for another stupid ticket). My gauge also lights up when I unlock/lock the car.
.
When you want to install it do it right the first time. Bending the bracket can be a b#tCH but I would do it right the first time. You dont wanna drive with them shaking on speed bumps and blinding people on the road. Just my 2 cents.
If I were to go back I'd still buy the fogs but have a better installation job done. Keep in mind the diameter is smaller than stock! You wont be able to notice it being smaller at all but I know that for sure because my installer didnt want to bend the bracket so he decided to pry the stock lenses off and plant the aftermarket fogs inside my stock housings!! It fit but boy was I pissed.
what a son of a b!tC#
because of this one of them moves a bit on nasty speed bumps. Not to mention it looks nasty. Thank god they are deep inside the bumper where no one can tell 
Im glad I didnt end up shooting the installer's ***
http://www.pfyc.com/store/merchant.m...ory_Code=GPEXT
I have a ton of before/after pics if your interested ill email them to you. I've had them on my car for around 5 months and drove with them on everytime I drove the car.
I have a short circuit now. Everytime I turn my fogs on I blow a fuse and that ends up disabling my gauge lights as well as the tail lights. This sucks but I dont know if I am the only person that ran thru this problem yet. I would try asking around if I were you just to be on the safe side.
Funny thing is my tail lights work when I turn my hazards on at night (so people can see me in the dark and avoid paying for another stupid ticket). My gauge also lights up when I unlock/lock the car.
. When you want to install it do it right the first time. Bending the bracket can be a b#tCH but I would do it right the first time. You dont wanna drive with them shaking on speed bumps and blinding people on the road. Just my 2 cents.
If I were to go back I'd still buy the fogs but have a better installation job done. Keep in mind the diameter is smaller than stock! You wont be able to notice it being smaller at all but I know that for sure because my installer didnt want to bend the bracket so he decided to pry the stock lenses off and plant the aftermarket fogs inside my stock housings!! It fit but boy was I pissed.
what a son of a b!tC#
because of this one of them moves a bit on nasty speed bumps. Not to mention it looks nasty. Thank god they are deep inside the bumper where no one can tell Im glad I didnt end up shooting the installer's ***