Started the Underhood cleanup..........
03-22-2009, 03:53 PM
#22
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Sep 2008
Location: Norridge, IL
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Okay...it's FINALLY all back together and running....love to hear what you guys think!
I know Silverghost is going to miss my intake..lol
I know Silverghost is going to miss my intake..lol
Last edited by Huggerorange73; 03-22-2009 at 05:20 PM.
So i'm a bit jealous
03-22-2009, 04:18 PM
#27
That looks very nice! One question off topic....what do you do when you convert to an LS6 intake and you don't get the LS6 valley pan.....how does the PCV systems hooks up on pre 01-02 ls1 f-bodies?
Great work! 
03-22-2009, 10:15 PM
#38
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Sep 2008
Location: Norridge, IL
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
To remove the tube just push it to one side, it'll release and you can pull it right off.
To remove it from the manifold, just get yourself a small flat bladed screwdriver and press down in the center of the tab on the manifold and pull straight out.
To remove it from the manifold, just get yourself a small flat bladed screwdriver and press down in the center of the tab on the manifold and pull straight out.
03-22-2009, 10:19 PM
#39
those are just stainless button caps from ACE hardware. I drilled out his coil brackets with 1/4" drill bit before i did the powder coating then went to ACE and got the bolts. I polished the tops up a bit also. I used socket caps on mine, either one looks nice IMO.
