Post pics of your pillar pods
I'm not sure about the wideband, but there are three wires you have to hookup: Ground, power, and light/dimmer feature. You will probably have to extend the harness from the gauge to the sending unit though.
i have the triple pod with A/F, Fuel pressure, and Rpm w/ shift light. ill have to take a pic tomarrow when it stops snowing. everyone always asks me if the middle one(fuel pressure) is a nitrous gauge lol. usually scares people 
and as far as pillar pods being a cop magnet, our cars are the definition of a cop magnet rolling off the show room floor. every cop and his mother get wood when they see our cars, especially mine tripple black doing 30+ over the limit at night
and as far as pillar pods being a cop magnet, our cars are the definition of a cop magnet rolling off the show room floor. every cop and his mother get wood when they see our cars, especially mine tripple black doing 30+ over the limit at night
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
How did yall wire the gauges. What I was thinking is instead of having each gauge wired by itself wiring them together then send that to the power source is that even a option or do you have to do them seperate?
That's how mine are ran. I ran one ground, one power, one wire for the lights, and looped the two gauges together. Obviously, you'll need to run 2 separate wires for the sending units.
. Hopefully I'll be able to do it this weekend(if my interceptor gauge gets here) then I'll post some pics. 
and I knew I wanted the triple pods so that the only reason I got the narrow band and with the interceptor I can already see everything else. so couldnt see getting anything else. 
[/IMG] 
