How to remove.......
#1
TECH Addict
Thread Starter
Join Date: Jan 2002
Location: Magee MS
Posts: 2,950
Likes: 0
Received 0 Likes
on
0 Posts
How to remove.......
I need to know how to take out the side panels in the back seat. I have a speaker that is acting up and I haven't seen any screws, so I decided to ask some people before I decided to mess with it. If you guys could tell me the best way to do it I would appreciate it very much!!
Josh S.
Josh S.
#3
TECH Addict
Thread Starter
Join Date: Jan 2002
Location: Magee MS
Posts: 2,950
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to remove.......
THANKS!!
I wasnt sure if it would hurt them doing that or not..... I'm gunna try and get those down this week and check that stuff out
Josh S.
I wasnt sure if it would hurt them doing that or not..... I'm gunna try and get those down this week and check that stuff out
Josh S.
#4
Teching In
Join Date: Nov 2001
Location: Cleveland, Ohio
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to remove.......
I need to take out those panels too, however they seem to be fastened by the coat hangers. So, how do you remove those coat hangers...there is a little clip in the middle, it looks like is supposed to be pried out, but I can't get the damn things out without thinking I'm gonna break it. Any advice fellas?
#5
Re: How to remove.......
Look at the center of the coat hanger. You will see a small tab. Slide this tab out with a small screwdriver and it will pull right off. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
#6
!Dial-up Director
Re: How to remove.......
You don't need to remove the whole panel to remove the speakers in the sail panel. Just pop the grill off and you will see the speaker and the 4 7mm bolts that hold it in.
Justin
Justin
#7
TECH Addict
Thread Starter
Join Date: Jan 2002
Location: Magee MS
Posts: 2,950
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to remove.......
Thanks Justin I haven't thaught about the grills poppin off. I guess I should probably ask some1 to kick me in the a$$ for that 1.... I'm gunna go give em an inspection in a minute and try to figure out if I want to replace them with stockers or put some new Pioneers or something in. Got any suggestions???
Josh S.
Josh S.