Too Much, Making it Rice?
#1
Too Much, Making it Rice?
im thinking over summer when i have time im going to make a light up front plate filler and a rear plate filler. would i be putting too much and making it look rice??? im thinking red led's and making the rear light up with the brakes and front light up with the headlights.
during the day it will be completely black
during the day it will be completely black
Last edited by my bandit; 05-08-2009 at 05:26 PM.
#2
I that would look bad ***. I've seen a member on here who had the nostrils for the hood light up and that would look good with the the bird up front but then again maybe too ricey.
#3
I'm not a fan of "lit up" parts on the T/A. I wouldn't call it rice, I just don't like it much. I think you're better off with choosing a reflective material for parts you want to catch people's eyes.
Lighting up the bird or the PONTIAC is too much IMO.
Lighting up the bird or the PONTIAC is too much IMO.
#7
Launching!
iTrader: (3)
Join Date: Jul 2006
Location: DFW
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
not rice imo if its done tastefully. there are a couple of guys on the board that light up the nostrils or do the front bird or the rear filler...don't think i've seen anybody do all 3 but i think if you do it right and clean then it'll set off the car! i say go for it, sets you apart from all the other TAs definitely!
Trending Topics
#8
not rice imo if its done tastefully. there are a couple of guys on the board that light up the nostrils or do the front bird or the rear filler...don't think i've seen anybody do all 3 but i think if you do it right and clean then it'll set off the car! i say go for it, sets you apart from all the other TAs definitely!
plus im a perfectionist so it will be clean and right. i plan on doing the front just the outline of the bird