What did you think of Fluid Film?
12-06-2009, 06:02 AM
#122
TECH Addict
So far I have used it to lube the hinges on all my cars, as a lubricant for drilling and tapping, and as a rust stopper on the undercarriage of my jeep. Geat product - in fact bought the large can just a few weeks ago!
12-07-2009, 12:26 PM
#125
I used my sample on my doorhinges for all my vehicles. Thankfully all squeaks stopped. I used to use a white lithium spray and it would start making noise again after a month or two. So far my DD doors are still quiet! 
I have also used it on my lawnmower gearbox but that has required reapplication. I suspect the gearbox is fubard. But it keeps going if I add a little lube. So until I kill it, I will keep using it.
I have also used it on my lawnmower gearbox but that has required reapplication. I suspect the gearbox is fubard. But it keeps going if I add a little lube. So until I kill it, I will keep using it.
12-11-2009, 08:56 AM
#128
Well, I got my sample yesterday, and am very impressed.
Let me start off by saying, I was pretty skeptical that this product would work as well as people are saying it does. It's like watching an infomercial, and thinking "there is no way that stuff works THAT good." Well, it does work that good.
First off, I used it on my door hinges, which had some cancer built up on them. They were squeaky, and the squeak immediately went away.
Next I used it on all the grease that had built up in my engine bay. I am not the type of guy that pops my hood at a car show like alot of you guys. When I bought the car, it was kind of dirty under there, and I never could get all the grease off. This stuff did the trick. It penetrated through the grease, and I was able to just wipe it off with a towel. This amazed me, because I could never get all the grease off, but Fluid Film made it effortless.
I also used it on a couple of places under the hood where I had scratched the paint by working on it. Little bits of rust were starting to show up here. I put the Fluid Film on these places, but I don't think I have given it enough time to eat the rust away yet.
My sample ran out quickly, because I was using it any, and everywhere. Half of my engine bay is spotless, and the other half is still dirty. This stuff made a huge difference. I will be buying more soon. I have already told a few do it yourselfers at work about it already. This stuff has so many uses, its magic.
I will be buying more, and everyone else needs to try this stuff out! It really is THAT good.
Let me start off by saying, I was pretty skeptical that this product would work as well as people are saying it does. It's like watching an infomercial, and thinking "there is no way that stuff works THAT good." Well, it does work that good.
First off, I used it on my door hinges, which had some cancer built up on them. They were squeaky, and the squeak immediately went away.
Next I used it on all the grease that had built up in my engine bay. I am not the type of guy that pops my hood at a car show like alot of you guys. When I bought the car, it was kind of dirty under there, and I never could get all the grease off. This stuff did the trick. It penetrated through the grease, and I was able to just wipe it off with a towel. This amazed me, because I could never get all the grease off, but Fluid Film made it effortless.
I also used it on a couple of places under the hood where I had scratched the paint by working on it. Little bits of rust were starting to show up here. I put the Fluid Film on these places, but I don't think I have given it enough time to eat the rust away yet.
My sample ran out quickly, because I was using it any, and everywhere. Half of my engine bay is spotless, and the other half is still dirty. This stuff made a huge difference. I will be buying more soon. I have already told a few do it yourselfers at work about it already. This stuff has so many uses, its magic.
I will be buying more, and everyone else needs to try this stuff out! It really is THAT good.
12-11-2009, 02:04 PM
#129
TECH Regular
Join Date: Jul 2007
Location: Colorado
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Got mine today! I'll post back with results!
Thanks again Dan....you are the man!
-Justin
Thanks again Dan....you are the man!
-Justin
Last edited by TooFastT/A; 12-11-2009 at 04:19 PM. Reason: Came in the mail late
12-12-2009, 06:24 PM
#132
TECH Regular
12-12-2009, 06:33 PM
#133
11 Second Club
iTrader: (12)
Join Date: May 2005
Location: Cedar Rapids, IA
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
this stuff is amazing. My sample has been out for a little while, and im glad I seen this thread, because I had forgotten to order some more! First thing I did when I got it was spray it on the back door hinges of my Cadi. I had a squeak that would not go away, no matter what I used on it. Guess what, its gone and hasnt returned. After seeing that, i went around spraying this stuff on everything. I had an engine stand, that no matter what you used on the cast iron wheels, it would still squeal away. Not anymore! i also sprayed it under the deck of my lawn mower. Now not even wet grass sticks to it. Love this stuff!!!
02-04-2010, 08:52 AM
#134
FormerVendor
Thread Starter
Join Date: May 2009
Location: Sacramento, CA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, we still have samples for members who haven't tried it and live in the U.S.
Listen, we have a fan page and we need members from the racing community. If you got a sample and liked it, please take a second to check it out at www.fluid-film.ning.com. We've got an LS1Tech group on the site so people will know where you came from.
Listen, we have a fan page and we need members from the racing community. If you got a sample and liked it, please take a second to check it out at www.fluid-film.ning.com. We've got an LS1Tech group on the site so people will know where you came from.
02-04-2010, 09:04 AM
#137
TECH Enthusiast
iTrader: (5)
Join Date: Apr 2009
Location: Houston, TX
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
THIS STUFF IS AMAZING!!!
Dano50 can i order some more through your site? or do i have to go to a retailer??? i love this stuff like people said it has MANY uses it's not just a lubricant it penetrates rust oil dirt grease and anything else you can think of... i let my auto tech teacher use some and he was really impressed by it, i have been telling everyone to get some... my sample ran out really quick, lol...
Dano50 can i order some more through your site? or do i have to go to a retailer??? i love this stuff like people said it has MANY uses it's not just a lubricant it penetrates rust oil dirt grease and anything else you can think of... i let my auto tech teacher use some and he was really impressed by it, i have been telling everyone to get some... my sample ran out really quick, lol...
02-04-2010, 09:11 AM
#138
FormerVendor
Thread Starter
Join Date: May 2009
Location: Sacramento, CA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Hey, thanks for the support! You can find your closest retailer here: http://www.fluid-film.com/shop/index.html
We also have a link to online dealers here: http://www.fluid-film.com/shop/online.html
We expect to pick up some big distribution this year in the automotive aftermarket. We're sponsoring the Indy Pole Day at Infineon Raceway Auguts 20 - 22nd.
We also have a link to online dealers here: http://www.fluid-film.com/shop/online.html
We expect to pick up some big distribution this year in the automotive aftermarket. We're sponsoring the Indy Pole Day at Infineon Raceway Auguts 20 - 22nd.
