PHOTOSHOOT: 02 TA K.I.T.T, Custom Interior ect..( Picture Extensive )
07-08-2009 | 02:37 PM
#23
any suggestions for a lid? had a granatelli.
its a hit or miss with most people. i love it.
07-08-2009 | 02:58 PM
#24
07-08-2009 | 04:05 PM
#25
07-08-2009 | 04:08 PM
#26
TECH Regular
Joined: Jun 2009
Posts: 428
Likes: 0
From: Victoria - Vancouver Island, BC, Canada
07-08-2009 | 04:30 PM
#27
07-08-2009 | 06:44 PM
#33
I took mine out with 2 butter knives. There is a ledged boss at the top and bottom, and tiny barbs at the left and right sides below center. Push the blade in till you find them then work the blade past them (deeper) and you get them to release and pull them out sliding them on the knife a little at a time, top, bottom, sides, OUT!
07-08-2009 | 08:12 PM
#34
[QUOTE=Duffster;11878163]Pick two or three styles of switch and go with it. . .
QUOTE]
they all serve a purpose.
yea i know. thats the only thing . any suggestions? i was thinking a couple chrome accents of course the valve covers and wire mod
yea i usually keep a microfiber cloth on top of the switch panel ( daily driver )which seems to be the area that attracts the most dust.
thanx man.
QUOTE]
they all serve a purpose.
yea i know. thats the only thing . any suggestions? i was thinking a couple chrome accents of course the valve covers and wire mod
thanx man.
07-08-2009 | 10:55 PM
#36
Registered User
Joined: Jun 2009
Posts: 20
Likes: 0
From: Redlands, CA
Looks good man. I love me some black ws6. What brand of steering wheel is that, and how much did it cost?
If you get the shifter painted black, that thing will fry your hands more than it already does. I have a Mach1 aluminum **** in my car, and it gets so effing hot in the summer, I can't even imagine a black one.
If you get the shifter painted black, that thing will fry your hands more than it already does. I have a Mach1 aluminum **** in my car, and it gets so effing hot in the summer, I can't even imagine a black one.
07-08-2009 | 11:42 PM
#37
Looks good man. I love me some black ws6. What brand of steering wheel is that, and how much did it cost?
If you get the shifter painted black, that thing will fry your hands more than it already does. I have a Mach1 aluminum **** in my car, and it gets so effing hot in the summer, I can't even imagine a black one.
If you get the shifter painted black, that thing will fry your hands more than it already does. I have a Mach1 aluminum **** in my car, and it gets so effing hot in the summer, I can't even imagine a black one.
07-08-2009 | 11:50 PM
#38
Jesus christ.. Everyone's a critic. Some people are WAY too soon to call things rice. So he has a light bar, so do I. Last time I checked it's 99.9% stock looking on the outside, how is it rice?
As for the engine bay, less is more. Paint a couple things, keep it clean, remove EGR, AIR, etc. Here's a pic of mine if you don't mind me posting it in your thread.
And a more recent pic, with a crappy camera..
Painted lid, valve covers, intake, coil packs, and just keeping it VERY clean in general. I scrubbed everything down with brillo pads and degreaser lol.
As for the engine bay, less is more. Paint a couple things, keep it clean, remove EGR, AIR, etc. Here's a pic of mine if you don't mind me posting it in your thread.
And a more recent pic, with a crappy camera..
Painted lid, valve covers, intake, coil packs, and just keeping it VERY clean in general. I scrubbed everything down with brillo pads and degreaser lol.
07-08-2009 | 11:52 PM
#39
you wouldn't believe the difference a polished ac condenser makes under there!again, great looking car!
07-09-2009 | 12:33 AM
#40
sick looking K.I.T.T.!!! dont forget this now to help add to the effect .... http://gizmodo.com/5018469/knight-ri...th-kitts-voice