Fuel Rail Cover designs???
Thread Starter
Launching!
Joined: Nov 2001
Posts: 237
Likes: 0
From: Bowling Green, KY
Fuel Rail Cover designs??? Please post pictures of your fuel rail cover designs or designs you've seen. I just got mine in the mail and I'm going to work on them this winter while I've got some time. I've got an airbrush and will probably come up with my own design I just wanted to see what else was out there.
Thanks,
Thanks,
Originally Posted by joshs2000ss
Please post pictures of your fuel rail cover designs or designs you've seen. I just got mine in the mail and I'm going to work on them this winter while I've got some time. I've got an airbrush and will probably come up with my own design I just wanted to see what else was out there.
Thanks,
Thanks,
TECH Fanatic
Joined: Jun 2003
Posts: 1,070
Likes: 0
From: Further South than Hell
Nice in red but too many logos. the SS on the FRC's was enough. Silver flagged stripes are nice too.
I carbon fibered mine, reddish glow (Sorry no pics), looks good with other carbon trim and FIPK with NOS nozzles in front plate.
I carbon fibered mine, reddish glow (Sorry no pics), looks good with other carbon trim and FIPK with NOS nozzles in front plate.
TECH Fanatic
Joined: Jun 2003
Posts: 1,070
Likes: 0
From: Further South than Hell
Originally Posted by SSmoked
can you guys tell me some of the companies that make goodies for your engine bay where can i get some Covers that just say 5.7L not Corvette
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
Teching In
Joined: Nov 2001
Posts: 34
Likes: 0
From: Van Nuys, CA
i kept my frcs simple, gloss black, with painted red "CAMARO" and red 5.7L stripes. i gotta re-wetsand and re-clearcoat them over my thanksgiving break though, since i got a little bit of orange peel the first time. overall, i think it came out ok. 
travisnd's stripes that flow from the lid to the FRCs are sweet!
Steve's engine bay is by far the benchmark by which all engine bay's should be judged! I never get tired of seeing it!
Steve's engine bay is by far the benchmark by which all engine bay's should be judged! I never get tired of seeing it!
There are some fuel rail covers for Aussie Holden LS-1s
that I haven't seen on this site, simple and embossed
"LS-1". I ran across them while trying to chase down
that funky engine cover from the tech manual picture.
http://www.emtechautomotive.com.au/c...re_vt_vx.html#
But they're down in Oz and dunno how ordering would be
(or if they'd fit an F-body, looks like the Commodore has
the engine more out-in-the-open).
that I haven't seen on this site, simple and embossed
"LS-1". I ran across them while trying to chase down
that funky engine cover from the tech manual picture.
http://www.emtechautomotive.com.au/c...re_vt_vx.html#
But they're down in Oz and dunno how ordering would be
(or if they'd fit an F-body, looks like the Commodore has
the engine more out-in-the-open).
I had some plates made at our local trophy shop.
I simply took them a diskette with the file I needed on my plaques, & they did the laser engraving on them for about $50.
Simple, inexpensive cover for the "Corvette" text.
I simply took them a diskette with the file I needed on my plaques, & they did the laser engraving on them for about $50.
Simple, inexpensive cover for the "Corvette" text.
Originally Posted by PontiacFan
I had some plates made at our local trophy shop.
I simply took them a diskette with the file I needed on my plaques, & they did the laser engraving on them for about $50.
Simple, inexpensive cover for the "Corvette" text.
I simply took them a diskette with the file I needed on my plaques, & they did the laser engraving on them for about $50.
Simple, inexpensive cover for the "Corvette" text.
I decided to do mine the hard way... fill the letters, sand it down, fill it again, sand some more, primer, sand some more... definately alot of work! They should look really good when they are done though. I'll post pictures after they are painted, clear coated and everything else...
TECH Regular
Joined: Aug 2003
Posts: 478
Likes: 0
From: Boca Raton, FL
How much are these from the Chevy dealer?
I've got a 2000. Are there differences for each year....and will one particular year from a vette fit better than another?
Will the LS6 covers fit?
What type of paint did you all use?
I've got a 2000. Are there differences for each year....and will one particular year from a vette fit better than another?
Will the LS6 covers fit?
What type of paint did you all use?
