post cars with STRANO lowering kits
#401
Thanks Sam, we just chatted on the phone an hour or so about the alignment. Definitely would recommend Sam's springs, they give the perfect ride height for what I was looking for, anecdotally lighter then the SLP Eibachs I took off and made the car feel more confident especially on the on/off ramps I've tested. Finally got rid of the SLP Eibach rear sag look which just looks wrong on our cars to have the nose to the sky.
Last edited by BC02SS; 04-16-2024 at 02:45 PM.
The following users liked this post:
WS6 #3392 (04-16-2024)
#402
LS1TECH Sponsor
iTrader: (41)
A reminder to check the build date on those tires Derek. I think BFG KDW's haven't been built in a long while. If they aren't dry rotted (and they might not be) they are most likely super hard. Tire rubber ages like pencil eraser rubber when exposed to air, ozone, UV. Once the release compound comes off the tire which helps protect them from that stuff, the clock is ticking.
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
The following users liked this post:
WS6 #3392 (04-16-2024)
#403
TECH Addict
Strano springs on mine too, fitted last year though. Much better than whatever had been fitted by the previous owner. Yellow Koni shocks all round and 19" rims with 275/30R19 front & rear.
The following users liked this post:
Sam Strano (04-24-2024)
#404
LS1TECH Sponsor
iTrader: (41)
Looks great. Any idea what was on there before? Like what color are the springs were or if they had any markings that might have distinguished them? Usually pretty easy to find out what they were, and I always like to know to add to my internal database. Which in this case is my brain.
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
#405
TECH Addict
Looks great. Any idea what was on there before? Like what color are the springs were or if they had any markings that might have distinguished them? Usually pretty easy to find out what they were, and I always like to know to add to my internal database. Which in this case is my brain.
Any idea what make they might be?
#406
LS1TECH Sponsor
iTrader: (41)
There's a company that's around that makes them that uses that color. There used to be a company called dynamic Motorsport DMS that used red. And eibach sportline are also red but it's usually a little bit different shade and those rears don't really look to me to be wound the same way the Sport lines are.
If somebody held a gun to my head and I had to guess I would say they are probably DMS. That is simply based on looking at the spacing of the rear coils. They are stiffer than mine, you can tell that because they have fewer coils in the main rate. It doesn't totally exclude other companies, particularly one who claim they make the best spring. But then make three different springs. Maybe they're all the best I don't know?
Nonetheless. I'm glad you are happy with mine. 99% of people are. And I'm appreciative that you took the time to make the post.
The following 2 users liked this post by Sam Strano:
300bhp/ton (04-25-2024), WS6 #3392 (04-25-2024)
The following 2 users liked this post by ThoR294:
Treburkulosis (05-02-2024), WS6 #3392 (05-02-2024)
#408
TECH Apprentice
#413
10 Second Club
iTrader: (8)
Now I'm on a cut z28 spring, koni sa with strano bars which seems to work pretty well for street driving.