I hate orange peel.
#1
TECH Regular
Thread Starter
Join Date: Nov 2001
Location: Madison Heights, MI
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
I hate orange peel.
I clayed and Zainoed my car a little while ago and I was admiring how bad *** it looked I noticed how terrible the paint actually is. Is there anything that can get rid of orange peel short of a new paintjob.
#5
Sawzall and Welder Mod
iTrader: (46)
Re: I hate orange peel.
The orange peel you see is the texture of the top of the clearcoat.
By wetsanding and buffing, you sand down the texture with micro-fine sandpaper, then buff out the sand scratches with compound.
If it had the factory paint job, don't have it sand+buffed... as the clear is very thin to begin with.
Even they manage to not break through the clear, it will be so thin that it will oxidize and flake off after the sun's UV gets to it.
By wetsanding and buffing, you sand down the texture with micro-fine sandpaper, then buff out the sand scratches with compound.
If it had the factory paint job, don't have it sand+buffed... as the clear is very thin to begin with.
Even they manage to not break through the clear, it will be so thin that it will oxidize and flake off after the sun's UV gets to it.