DDM Tuning
TECH Fanatic
iTrader: (3)
Joined: Mar 2003
Posts: 1,162
Likes: 0
From: Bensalem, Pa, now montreal, Quebec
Im getting a harness because my car has a problem with the 35w HID kit i have in my headlights, so for me i will have 2 harnesses, one for the headlights and one for the foglights. Its not a requirement, but especially if your running more than one HID setup, i think its recommended.
Are you guys' low beams brighter than your highs with these? I was just wondering, i knew the high beam HID's take too long to heat up, so even with a good halogen bulb are the highs basically the dims?
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Feb 2004
Posts: 1,112
Likes: 1
From: rosemount,mn/windsor locks,ct
Alright just ordered up the ddm 3k 880kit with a harness. I did some searches on it. Do i reverse the polarity of the stock plugs like the headlight plugs? Saw something mentioned about painting the inside of the foglight if its cracking/peeling? how would you go about that? Does it come apart in pieces?
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Feb 2004
Posts: 1,112
Likes: 1
From: rosemount,mn/windsor locks,ct
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Feb 2004
Posts: 1,112
Likes: 1
From: rosemount,mn/windsor locks,ct
Teching In
Joined: Feb 2010
Posts: 40
Likes: 0
From: Knoxville/Johnson City, TN
guys i need help... i bought a 35w, 6000k, xentec hid kit from ebay, its not the slim balast but the regular, the headlights look good and are fine but the fogs are questionable, i bought the 808 size bulb and i noticed alot of people are sayin something about 880? the 808 fits fine, but idk if the other is better 
also one foglight bulb looks a diff color, you can see from the pic that it is a diff color when it is reflected on the ground?? why would it be doing this? Is one a diff temp? something up with the housing? It frustrates me to have them all look good except that one... take a look at the pics, didnt mean to high jack thread.... just frustrated
the one on the left (passenger side fog) is the one that does NOT match the rest
also one foglight bulb looks a diff color, you can see from the pic that it is a diff color when it is reflected on the ground?? why would it be doing this? Is one a diff temp? something up with the housing? It frustrates me to have them all look good except that one... take a look at the pics, didnt mean to high jack thread.... just frustratedthe one on the left (passenger side fog) is the one that does NOT match the rest
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Feb 2004
Posts: 1,112
Likes: 1
From: rosemount,mn/windsor locks,ct
I cant wait to get my 880s in...DDm tuning has been great. My buddy bought a porsche and wanted to get HIDs so he ordered some for $200+!!!! I laughed and told him he could get them for $39.99 from DDM tuning...he didn't believe me and told me that if I could he'd buy my set. Well...he's got some now and so do I!
Any step by step for the harness? I got it and am looking for where and how to wire since it didn't come with instructions. I think the red wire with inline fuse goes to the battery block on the right of the engine and the other ground to somewhere of my choosing on the frame. I would then need to reverse all the connections to the ballast and out to the bulbs correct? The red connector isn't quite large enough to fit over the post so I will either replace or widen the hole. Is this pretty much the way everyone has been doing it?