dragonZ28

iTrader: (32)

We only sell them in pairs, so it is for two of them.

Thanks, Roger

dragonZ28

iTrader: (32)

No issues at all, the "converter" takes car of all that. It is designed to use in a 12 volt system, that's how we ran our tests here.
Basically you wire from the 12 volt circuit to the converter with the plugs we sell. Then from the converter to the sills built in wiring we have already installed. The Converter is required, and can be tucked away under a seat or in a panel.
The converter has an area where batteries can be installed if you want, but we know you guys will want to wire them up. So just cut off the battery section of the converter. it is about 2" wide x 1" tall, and about .5" thick.

Thanks, Roger

dabest09

iTrader: (1)

Those are awesome

dragonZ28

iTrader: (32)

We have already sold some sets of these sills for the 2010 Camaro.
But, none for the 93-02's yet.
Lots of questions from you guys about them though.

Thanks, Roger

Danny2tek

iTrader: (1)

The "Trans Am" script is available correct? Also is there a way to get them with no design on the ends?

dragonZ28

iTrader: (32)

Believe it or not, we certainly can do Trans Am text, and we can make them anyway you want as far as i know.

Thanks, Roger

bj350hp

iTrader: (4)

How about Firehawk text

dragonZ28

iTrader: (32)

If Mr. Hamburger says yes, we can do it. So far he has not said yes.
And yes we have asked about it.

Thanks, Roger

SHovV

iTrader: (1)

awesome products. i would be real interested in these in the coming months

MasterTomos

iTrader: (15)

love it, very interested

pheer

iTrader: (3)

x2, TA script + Red lighting

ColossalCamaro

iTrader: (1)

What about 4th gen Camaro stuff? So far all I've noticed was Firebird script on these.

dragonZ28

iTrader: (32)

This can be done right away. No problem at all.
Just let me know.

THanks, Roger

dragonZ28

iTrader: (32)

No GM logos yet.
Not until these are in final approval from GM. These sills fit either the Trans Am's or Camaro's or other F-bodies for 93-02.
We post up an example piece, thinking that you guys understand that these fit both cars, and the we can customize them for either car.
They are just not able to have GM logos yet, which I have already posted at least once a day.

So, what do you want to see on them? Just let me know.

Thanks, Roger

travisnd

iTrader: (21)

when GM logos are available, will you be able to do a 35th SS emblem on the door sill and light it up red?

dragonZ28

iTrader: (32)

Yes we will.


Thanks, Roger

97ramsst

iTrader: (162)

I am ready to order mine but want to verify you can get them polished rather than brushed and if you get no side designs that area will just be blank like the polished seals now...right? Where do I put in the notes that I want them polished.

Also on the colored ones...do they look clear (like the one on your car) when not on or is the plastic whatever color you order?

dragonZ28

iTrader: (32)

We can do these in mirror polished stainless. And we can remove the designs on the sides as well. Then this area will be mirror stainless just like you are asking for. The lights when off will be slightly the color of the light.
A blue light will appear slightly blue when off.
The best way to do this order is to send me a PM, and we can handle it directly for you. These options do not exist on the site, but we can do it.
We do custom emblems like this all the time, since some orders are just better handled "in person."
Just let me know what you need, and we will get it done for you.

Thanks, Roger

ColossalCamaro

iTrader: (1)

What about doing one with this kind of logo?

dragonZ28

iTrader: (32)

After GM aproves them, yes we can.