Wire Mod and TCS Relocation Done
08-23-2010, 06:17 PM
#1
Staging Lane
Thread Starter
Join Date: Feb 2010
Location: warrington
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Wire Mod and TCS Relocation Done Well i finally took the weekend to take a shot at the Wire Mod and the TCS Relocation. I must say that they both were very simple and easy with no hang-ups. The 1 3/4 hole that i cut into the wheel well was filed and wrapped in, of all things, a gas cap o-ring that fit perfectly. and luckily wince my car is black the empty holes were able to be filled with christmas style plugs. i think that it looks 1000 times better.
08-23-2010, 07:24 PM
#3
TECH Apprentice
iTrader: (10)
Join Date: Jan 2008
Location: Florida
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Great job! Looks good...Went out to the cave to stare under the hood of mine and noticed that I don't even have a TCS 
Its just not there. Its not behind the pcm either...?
Its just not there. Its not behind the pcm either...? 
08-23-2010, 07:53 PM
#6
Staging Lane
Thread Starter
Join Date: Feb 2010
Location: warrington
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
He is right it was an option back in the day. its very well possible that whoever ordered your car didnt want it. i put mine behind the pcm because i wanted to keep it stock and not get rid of it but have it look clean.
08-23-2010, 10:02 PM
#7
TECH Regular
iTrader: (5)
Join Date: Feb 2007
Location: La Puente/ Whittier, CA
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
You LS1 guys are so lucky to have a TCS thats so easy to relocate... LT1 is bolted right to the intack manifold over the diverside valve cover... it's uber-ugly.
Trending Topics
08-23-2010, 10:45 PM
#8
TECH Junkie
iTrader: (17)
Join Date: Aug 2006
Location: Rapid City, SD
Posts: 3,161
Likes: 0
Received 0 Likes
on
0 Posts
I'd like to see some close up pics of where the TCS is actually located.. I've seen this done so many times, but am clueless as to how it rests behind the PCM.
08-24-2010, 11:58 AM
#9
Alls you do is zip tie it to the big bundle of wires that comes out of the firewall to the right of the PCM. You put it so the top (plastic pop off cover) is face TOWARDS the firewall, and bottom (metal cylinder base) is facing toward the front of the car. The cables should face the right, toward the driver. It's easy to see once you have the PCM out of the way how it mounts in there.
08-24-2010, 05:43 PM
#10
Staging Lane
Thread Starter
Join Date: Feb 2010
Location: warrington
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
yeah all you do is take the pcm out (two 10mm bolts) then zip tie the whole thing to a bundle of wire as stated above. super easy. longest part is lengthening the wires.
