Tim L's pewter trans am
01-04-2003, 10:59 PM
#2
TECH Fanatic
Thread Starter
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tim L's pewter trans am eibach pro kit, 15X3.5 and 15X10 prostars.
<img src="http://www.soslow.cz28.com/slide_shows/Trans_Am_Pictures/p8310011.jpg" alt=" - " />
<img src="http://www.soslow.cz28.com/slide_shows/Trans_Am_Pictures/p8310011.jpg" alt=" - " />
01-05-2003, 08:29 AM
#4
TECH Apprentice
Join Date: Nov 2001
Location: Casselberry, FL.
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tim L's pewter trans am How does the car 60'? I have the pro kit on my car and I can only get a 1.60 60'on my ET Streets. I was going to reinstall my stock springs to try and get a better 60'. I was going to cut 1 coil on the front and take the rubber spacer out of the rear.
Jim
Jim
01-05-2003, 09:19 AM
#5
10 Second Club
iTrader: (2)
Join Date: Nov 2001
Location: DeRidder La.
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tim L's pewter trans am </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by FastMover:
<strong> How does the car 60'? I have the pro kit on my car and I can only get a 1.60 60'on my ET Streets. I was going to reinstall my stock springs to try and get a better 60'. I was going to cut 1 coil on the front and take the rubber spacer out of the rear.
Jim </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">My best 60' on BFG Drag Radials has been a 1.61 this past November at the Thunder Shootout..That was leaving at idle with 3.42's in the car and the QA1's set at 4 on the rear..
I have tried ET Drags but chewed up a 3.73 ring gear but I blamed that to a set of used gears I bought with no telling how many passes on them.
Mike convinced me to go with 4.10's and thats what is in the car now and will finally get to run the car the 18th at Hallsville Texas..
If anyone is near or around Hallsville on January the 18th the Louisiana Fastest Streetcar Association is having one of there races there..Go here for more details..
www.racepics.net
<strong> How does the car 60'? I have the pro kit on my car and I can only get a 1.60 60'on my ET Streets. I was going to reinstall my stock springs to try and get a better 60'. I was going to cut 1 coil on the front and take the rubber spacer out of the rear.
Jim </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">My best 60' on BFG Drag Radials has been a 1.61 this past November at the Thunder Shootout..That was leaving at idle with 3.42's in the car and the QA1's set at 4 on the rear..
I have tried ET Drags but chewed up a 3.73 ring gear but I blamed that to a set of used gears I bought with no telling how many passes on them.
Mike convinced me to go with 4.10's and thats what is in the car now and will finally get to run the car the 18th at Hallsville Texas..
If anyone is near or around Hallsville on January the 18th the Louisiana Fastest Streetcar Association is having one of there races there..Go here for more details..
www.racepics.net
