Help with stance
Thread Starter
11 Second Club
iTrader: (14)
Joined: Aug 2008
Posts: 444
Likes: 0
From: Hendersonville TN
Help with stance I recently lifted the nose of my car up due to constant scraping, poor handling, and overall just too lowness. I didn't originally lower the car and I don't know what springs are in the front, only that they are a light to medium blue and they say "Factory" on them.
All that aside, I was wanting to get some opinions on the stance. Should I raise the rear up a bit or leave it with the slight nose high rake it has? Sorry for the crappy cell phone pic, it was kinda spur of the moment.
All that aside, I was wanting to get some opinions on the stance. Should I raise the rear up a bit or leave it with the slight nose high rake it has? Sorry for the crappy cell phone pic, it was kinda spur of the moment.
its not too bad/or noticeable, but i'd still probably raise the rear... reverse rake is a no-go (depending on how noticeable it is in person). I'm dealing with the opposite with my car. I want the rear lower, i'm on BMR's with the heater hose mod in the back, but they still didn't go as low as i'd like, no where near as low as the front, so its got the raked look, which i'm not a fan of.
Thread Starter
11 Second Club
iTrader: (14)
Joined: Aug 2008
Posts: 444
Likes: 0
From: Hendersonville TN
Well I had the heater hose mod as well as a full coil cut off some 3rd gen springs. I took the hose off and put the stock insulators back on and it evened/slightly raked the stance to the good.
I would suggest that if you want to lower your rear just cut half a coil off, replace the hose, and try from there. It didn't hurt my ride quality and gave me the stance I wanted at the time. Too bad it was just too low all the way around.
I'll post some pics tomorrow since it was too dark when I finished.
I would suggest that if you want to lower your rear just cut half a coil off, replace the hose, and try from there. It didn't hurt my ride quality and gave me the stance I wanted at the time. Too bad it was just too low all the way around.
I'll post some pics tomorrow since it was too dark when I finished.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
