How Can I Fix This?
Thread Starter
TECH Addict
iTrader: (10)
Joined: Dec 2007
Posts: 2,052
Likes: 1
From: Jacksonville, Fl
How Can I Fix This? well i finally figured out the rattle in the back when i have my subs on. i guess it got bent when my car was getting painted but how could i fix this? i know a permanent way but i dont know if i want to go that route. all of the clips are on and not broken
Thread Starter
TECH Addict
iTrader: (10)
Joined: Dec 2007
Posts: 2,052
Likes: 1
From: Jacksonville, Fl
thats the thing. there are no broken tabs its just bent there. i was thinking about throwing some jb weld on the inside and letting it dry but i dont want a permanent fix just incase
You sure there isnt a foreign object just caught in between the panel and deck lid ?
Im kinda shootin in the dark here cuz the pics are hard to tell exactly whats goin on .
Im kinda shootin in the dark here cuz the pics are hard to tell exactly whats goin on .
Thread Starter
TECH Addict
iTrader: (10)
Joined: Dec 2007
Posts: 2,052
Likes: 1
From: Jacksonville, Fl
nope no foreign objects stuck, nothing. its just purely bent i checked the tabs and they aare not broken. its just that corner is bent which is rubbbing on the plastic panel under it and its annoying
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
Thread Starter
TECH Addict
iTrader: (10)
Joined: Dec 2007
Posts: 2,052
Likes: 1
From: Jacksonville, Fl
I think it was when the body shop removed it when my car was getting painted and that's where they started pulling it off. I was thinking about trying velcro up around that corner
When they removed it, maybe some of the other tabs werent inserted right making the cover bend a bit. Remove it and replace the tabs, if problem is still there, then velcro would be your second option.
