LS2 GTO detail with autzone PC
Here are some before pics.


The driver side door. Notice the swirls and hazyness

Washing and hosing off.

The goat didnt need too much clay bar work but the front bumper and stripes def needed it bad. Kinda hard to tell but here are the pics of the stripes



On to the PC. I used a lake country orange light cutting pad. Here you can see the before on the right side of the door and the after on the left. This was with a vibrant cut 1500 compound.

Next was a lake country blue foam polishing pad with a polish called deep ebony.

Then I waxed it with a red lake country pad and Mcguires gold class. cleaned the wheels and windows. Here is the finished results.



Trending Topics
The Best V8 Stories One Small Block at Time
As far as the tool goes, I feel its a nice piece and works well.






