Few pic's of my H/C/I wonder.:D
#1
Few pic's of my H/C/I wonder.:D
Hey guys just a few pic's of my H/C/I WS6 wonder.. I say wonder cuz this car has out ran 4 fully built 408ci cars..3 f-bodys and 1 408 GTO.
I dont know how but it did..
I dont know how but it did..
#4
Alrighty lol...Motor is out of a 04 z06
,PRC LS6 Stg 1 heads
-Pat G custom cam
-Vengeance ported FAST 92/NW92 (painted black)
-Pacesetter LTs
-TSP TDs w/ bullets, ran underaxle w/ Mecham tips
-Bosch III 36lb injectors
-Thunder Racing ported LS6 oil pump
-FTP 85mm lid
-Delco 85mm MAF
-Tuned by George @ Boost Performance
Suspension Modifications: -Strano springs w/ Revalved Bilsteins
-BMR; PHB, SFCs, STB, LCAs, LCA relos
-Strange S60 rearend, 35spline axels, True Track, 3.73's, welded axels tubes, 2in studs, 9.75" housing, 3in Molly drive shaft
-Ram HDx clutch/flywheel, with Tick built tranny
On the 10bolt car made 477rwhp... Havnt dyno'd on the S60 yet..
,PRC LS6 Stg 1 heads
-Pat G custom cam
-Vengeance ported FAST 92/NW92 (painted black)
-Pacesetter LTs
-TSP TDs w/ bullets, ran underaxle w/ Mecham tips
-Bosch III 36lb injectors
-Thunder Racing ported LS6 oil pump
-FTP 85mm lid
-Delco 85mm MAF
-Tuned by George @ Boost Performance
Suspension Modifications: -Strano springs w/ Revalved Bilsteins
-BMR; PHB, SFCs, STB, LCAs, LCA relos
-Strange S60 rearend, 35spline axels, True Track, 3.73's, welded axels tubes, 2in studs, 9.75" housing, 3in Molly drive shaft
-Ram HDx clutch/flywheel, with Tick built tranny
On the 10bolt car made 477rwhp... Havnt dyno'd on the S60 yet..