Back Seat
Thread Starter
TECH Regular
Joined: Jan 2003
Posts: 427
Likes: 0
Back Seat I want to remove my back seat, along wit seat belts, and the two ***** that stick out which lock the back seat in place, and anything else associated with the backseat. How do I go about doing this. I was just going to start taking things apart, but I thought I'd try to make it easy and get a step by step.
Re: Back Seat 1. Remove the seat "buns" I believe 13mm blots facing forwar, somewhat centered at the very front bottom of the seat "bun"
2. Fold the back seat down and remove the seat belt loops from the seat back. They are a Torx bit and are VERY difficult to remove
3. Fold seat back up and remove two 13 mm nuts from the hinge points, one at each lower corner. Then the seat back comes out.
4. Seat belt reveivers are abig Torx bit.
5. The seat back latches are also big Torx bits.
6. The seat belt - dunno, never took then out before, although in a convertible they are A LOT easier to get to than a coupe.
2. Fold the back seat down and remove the seat belt loops from the seat back. They are a Torx bit and are VERY difficult to remove
3. Fold seat back up and remove two 13 mm nuts from the hinge points, one at each lower corner. Then the seat back comes out.
4. Seat belt reveivers are abig Torx bit.
5. The seat back latches are also big Torx bits.
6. The seat belt - dunno, never took then out before, although in a convertible they are A LOT easier to get to than a coupe.
